installation aux cable on the fiat 500

[michele30]

Excuse raga if you go out a bit from the scheme, a girl asked me if ? can install the aux cable to listen to music from his iphone on this car, the fiat 500 with blue&me
I am a bit available on the internet and I saw that you can do, but there are complications to the speech of the blue&me why? the wires to exit and enter are the same as the blue... c'? anyone that can give me some information about if ? feasible this setup?
Thanks

[blackwolf76]

if I'm not mistaken has the bluetooth function is the cell that the machine??

[polini]

if the car radio has control cd-changer, you can fool yourself by mounting a pin mini-ISO jack 3.5 mm

here's an example...
mini iso yellow link at the top left
500 aux.jpg

[michele30]

what intedi for cd-changer?
the radio ? this is in the photo and also has the blue&me then that port you indicated in the picture ? occupied by the system blue&me , should I disconnect " then exclude the plug the blue&me " and insert the cable with the aux output right?
Or wanting to ? possible to run both?

[gianni1001]

if I'm not mistaken when the car has the blue&me you can add aux cable ...

[polini]

then you should try putting it in parallel on the same plug

otherwise you have to pick up the signal with the connector of the mini iso blue through an interface that produces a company, "excluded" without losing the blue&me

[gianni1001]

In parallel I have already? tried does not work and even entering the mini ISO in place of the cables that go to the socket in the central console (in case there is the blue&me)
By inserting the plug, the radio will not switch to AUX
That I know the phaser is a control panel that allows you to recover the steering wheel controls and maintains the blue&me
in case you want to replace the radio with a not original.
In all of the 500 that I did Not come with blue&me, the radio switches to AUX

[michele30]

they told me that it may work by connecting the wires to the output of the cd changer, the cio? blue cable, can you tell me something about it, or if someone has already done this test?
I think the same thing that I said Polini but the cable ? blue then to the far right for what I understand.
But even here one must leave the written cd-changer in the radio or out after you made the change?

[gpw3]

I don't think bait the written cd-changer mounting cable only. There must always be a signal that arrives from a disposistivo or button that will enable the port

[polini]

they told me that it may work by connecting the wires to the output of the cd changer, the cio? blue cable, can you tell me something about it, or if someone has already done this test?
I think the same thing that I said Polini but the cable ? blue then to the far right for what I understand.
But even here one must leave the written cd-changer in the radio or out after you made the change?

if it comes out and you see only after the change