-
Module eco power chip
What do you think of this module ensures that the +20% torque + 15% power consumption reduction of 15% for diesel engines connected to the fuel pressure regulator aumentado the press of the fuel and quaella of the turbo .
-
I personally modules hate them, I just don't think that you will reach the peak performance t? cited no offense
but if you look closely at the form you will see that must be connected on the rail as it does to increase the turbo?
-
Also I'm not agree to the use of hydraulic agg. that do nothing more than to see all of the ecu values are offset, within certain limits, to fool the ecu and let it react according to what is established there are passive modules (resistance ) to be discarded immediately and active with micro-to-edge, as this form that I have seen and I have proposed to mount a microcontroller takes the signal from the connector to the pressure transducer, fuel rail and returns it worked out in accordance with a curve in the memory controller, increasing the pressure of the fuel as the output of the module (processed signal) go to the ecu this subsequently controls the press. the turbo cnm. among the additional this not ? evil, it seems that the values above are close enough , tried it on juliet tdi.
-
ke I know of no module manages the surge, even if it was able to increase the pressure of the turbo as you do with the lim.
-
Without spending money unnecessary, if you're surfing the web c'? a guide on how to change the sensor rail pressure. Simple and efficient
Write permission
- You you can not post new threads
- You you can not send answers
- You you can not send attachments
- You you can not edit your posts
-
The rules of the Forum