Hello to all, I think I have posted yesterday a post that seems to not be pi? this, then, try again to expose a problem that I have with the following the car.Now I can say I know well the edc16, especially the c39, on this for? although I have all the limiters diesel lifted, the lambda lowered that limit, I don't find the deal? diesel and I. From the map I ask 100mm3, the first problem ? that diagnosis over the 90mm3 about the iq must be in the negative, and read-98mm3, and I can't understand why? this, with maps from 90mm3 was not the case, I also do not understand why? it never gets to 100 just, but always 2-3 mm3 in less. Now we come to the main problem, after the 3500 begins to limit the iq, although it should by the various limiters and lambda. Size 85mm3 about fixed, especially from the fourth, of course, the limiters for gear have also been a mod but the problem does not change. What's even more? strange ? that raising the map conversion Nm-iq limited for even less, about 75-80mm3 about. Now, this problem on the 159 with the same engine, and the map is practically identical does not create this problem, the only differences that I found are the maps immediately after the maps pedal. On the 159 are all at 0, both the first two and the following two, on the giulietta, however, are not to 0, on-axis in the first two we find km/h and % throttle and in the map we find the Kw as the value, which comes to a maximum of 150kw. On the two maps still following, who have smepre a similar name, we have % pedal (I seem to remember) and the gear engaged. now in this we have 0-1 and 2-speed gearbox, which are raised to 260-300nm, the curves after are 0. Also the latest maps on the 159 are at 0. May be this series of maps that limit? I'm going crazy why? I can't find anything else that would limit and I would like your opinion.
Thanks to you all for your helpfulness
Quote
Originally Written by angelolsp
