Gallo v2 vs renault mascott dxi 150

[jared_poe]

Hi I have a doubt, I read the ECU, this means using the protocol of the renault espace edc16c3 it seems to me, and the reading seems to be OK...what do you say to the avr? problems in writing?
Some of you have had experiences on these vehicles?

[blackwolf76]

Normally if the read should also write it...

Anyway if edc16 I would bdm... better not risk it.

[legendaryslave]

Quoto for the bdm are Some bitches in writing loss varied

[jared_poe]

Update...I was able to write to the file using the same protocol, unfortunately for? I was not able to remove the EGR.
I did two tests, one by copying the changes to the EGR that I found in the network of a renault Master, but more than that the light is always turned on by the diagnosis, I could see that the EGR was working on.
Another I made trying to pull a line as was done in the edc 15 on three maps that I thought I would relate to the EGR, the light is always on, but from the diagnosis seemed to be that the valve is not being driven (the variation from 0% to 1.2%).
At this point I need help or someone to explain to me how you delete the EGR from the map properly on these ECU, or I explained how to delete the DTC related to the error P0400 (EGR Flow Abnormal)