however, reading in the bdm is not very useful to the soldering station... but to be safe in emergencies also a toy that works quite well and is always better to have it.. always accompanied by a programmer, otherwise it makes no sense
however, reading in the bdm is not very useful to the soldering station... but to be safe in emergencies also a toy that works quite well and is always better to have it.. always accompanied by a programmer, otherwise it makes no sense
On edc 16 does not need soldering station... if you always work on the ecu's "healthy", but put the case, you will happen some burnt, you can serve eprom or flash desolder and read, and maybe transplant.
If you take a soldering station, take one that has the hot air, in certain situations, a pu? make life significantly easier.
I repeat only and' good precaution to have a station, and preferably with hot air... but of course, desolder the eprom without an adequate external programmer is not needed... then the minimum package programmer and station hot air..
guys I use beautifully kess v2 and ktag, are that and a wonder, some problem in the beginning with the pc, but then I go for a dell d630 for kess and a compaq for ktag, everything ok...
even if they are great tools when you need to unsolder to resume we do not make anything!!Originally Written by rdponline
What is a hare? A rabbit Abarth
It is logical, if you need to desolder with kess ktag or any other you choose to do nothing, you should have at least a UPA
the upa does not make the flasks!!!!!a gqx4 you are to place both flasks for micro ec.....!!!!
What is a hare? A rabbit Abarth
Well charles, thanks for the tip...
please gerry!!
What is a hare? A rabbit Abarth
Write permission
Quote