But in the 70cv and similar to the 90's?
or trawled a file 70cv and not found..
But in the 70cv and similar to the 90's?
or trawled a file 70cv and not found..
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
advances 69.jpg
Advances are not to the contrary, try to understand what c'? in the axes. The second ? one of the laps...
Five, in the 70's ? very similar, here is a screen. Attention to?. In 69, the map ? in 16bit, and goes moddata in 16-bit!
Stop the advances of the main...does anyone know the advances in pre-and post-inj?
Umh, I just want to study them, with regard to the discourse smoke, quoto Giacomo (jack).
For another, it depends on how is the mass of the lambda. Currently I have tried the advances of the opel corsad 90 hp in mine, which appear to be pi? pushed, and I anticipated a p? the high with the high iq...?, fillet all over with pre-and post-injections, it would not hurt...
danny how many degrees will raise the advances? for example, I've natato that raising more from the high, the front of the machine behaves more ready at high rpm if you can turn up to lower the car knocks or smoke, but it is always the hole from 1800 to 2200 rpm if you push the pedal to the low ones improves a lot the hole but it seems to make the high
On the 1.3 90 hp if you don't go over 55mm3 fixed you can also leave stock, however, given that ? the much anticipated and the bp of advances ? to 55mm3.
dom86 of how much you've raised that beat? Hast made them in 8bit true?