Are struggling with a bravo 1.6 mjet 120 hp and I have to close the egr, as I'm reading in bdm seen that I can't get in to read it in the serial, I have a doubt that I is, the egr valve should be closed with the two panettone classic edc16c39 or should be lowered for all 6?
I reloaded the images that are not seen.
it's good the screen egroff 2Originally Written by michele30
while the others are still talking about us, we have already solved the problem
GARAGE0864 ԼЄƓЄƝƊƛƦƳƧԼƛVЄ
thanks, in fact I loaded that and everything is ok, but when I did the other mod and then I had had a doubt.
What time ( that is, EGroff 1 ) why? doing those mods ? wrong then?
I honestly use the edit egr off1 and ? always everything worked out
I egr off 2 is fine
Time closes pi? what is necessary, we say that the classical two panettoni work.
It does not mean that time is wrong, in fact if you check with damos goes to close the controls for upper and lower EGR RGN (RGN is probably for Regeneration always if I'm not mistaken)
so it should be good even in the mod that makes time, only that just the usual 2 panettone.
Another thing I read a file where they closed the egr for a edc 16 always fiat by the closing of the classic 2 panettone, but pulling the straight line on the injection phase as in the edc 15, do you know if you need something to do so or those who did not understand much?
Then maybe I am confused, do I have to re-check damos, but keep in mind that the closing with the 2 panettone works.
no straight line on the map of the egr should not be on edc16.
Write permission
Quote