heeeellllppppp

[sandro]

but here none of the explanations for the new arrivals ???'

[nox]

You have to zipparlo and then I believe that to do this you need to have more? a tot messages

[sandro]

ok thanks for nox

[sandro]

20.rarhello mark, this is the file to check

[marco_evolution]

ok, sandro you look at it this evening if I can..however know that already from ori to what you have written to me quadra I would check geometry turbo and map sensor first

[sandro]

sensor mapp????? and where can I find it ??? for the geometry and everything is ok disassembled and checked before to install one under the 22 60

[Macchinista]

The map sensor and the intake manifold!

[sandro]

thanks mark I'll explain I have mounted a 2260 v garrett, and after I tried it on the map I now have the following result that if accellero adagio the pressure up to 1.5 bar if accellero hit from 1.5 down to 1.1 calculates that the pressiono I have increased 150%, and changed the curve of an overboost then theoretically attend the limiters and should not be pi? and I'm not that expert to understand where are the limiters or titanium 1.6 and I believe that not read them all

[sandro]

ok, thanks a machinist then the one I tried with another bmw the same part number and it works

[Macchinista]

A pressure limiter turbo you from gi? the titanium in the drivers, and the called limiter pressure. Then maybe postaci the mod file that cos? maybe you can take a look to see if the problem is not just them!