Hi, I have bought the v54 by a few days and for those like me who always has to read from the serial port, I have to say that ? a bit of a mess, in fact, the many threads and we do not understand anything...who can? recommend a practice or a course to be able to familiarize yourself with the readings on the bench? thanks
you've given a look at the guide that c'? together with the rooster??Originally Written by ake85
hello I read the guide but do not post all the pictures on how to assemble all the components and then for those who like that ? the first time I use the cock does not ? simple...I would like full images
what don't you ? clear in particular?
then I suggest you to buy a template bdm that saves you a lot of welds
the template is the gi? jack and I arrive on Monday?..then the manual tells me to connect the USB socket to the galletto 4 BDM cable and here we are, then, the food with the jack so you ignite? the red led( ? here I block)...this jack I think I've figured out what it is but to feed it to 12volt adapter needed...then I am being shown the picture on how to assemble the adapter, CMD,...a part of me says to connect to press CMD, size, sport (I don't know what you are talking about), and then from the other side to feed the wire with the switch on the 12volt...we are only talking about ECU BOSCH
dimension sport ? a manufacturer of a dime, it just says that if you are in possession of one of these, you can use it
I assume that you have taken the plexiglass, which, however, goes well with the cock
the power supply you have to buy separately, and it cost around 10 €, and then I would get even one pin female connector of the type that c'? in the cable, the bosch, the white one so to speak
bosch I have not yet made, but personally the power supply via jack, I never date, only to the jack that I said to you before, and the red led ? always on even when the cos
call size sport "manufacturer of jigs" ? wrong and simplistic ? a company that produces sw and hw for tunin, and much more, visit her website and then see.
ugo ---- president A.E.P.
exact I bought the template in plexiglass with the various schedule spring, and I don't need to do any welding...the plug on the saw, now I miss only the power supply and then I'm ready...in fact give? current without the jack, it seems to me the better for me...then you do? know when to try? read them thanks
it certainly was to understand that it was a "brand"
I personally use a galletto v53 and a mpps...? how would you have advised the kess goes very well, I used it a few times and never a problem... you Could also pick up a mpps according to me does not cost a lot and on some cars, type golf 4 etc. ? perfect... I use the ones with the scatoletto not the ones with the cable (board to take the one in the box).
Write permission
Quote