delete the egr and fap alfa 147 gt 150 hp edc16c39

[panterargento]

Just cos?, in fact, when I had the 159 I had recovery problems for a sensor with the following error which I then deleted with the MES, and I can say that I do not you ? on light "engine failure", and after that I reported to ori that the area of the light ? she returned to work, same thing for the clogging 1000%, in practice, after the use of those sw you have to manually intervene and fix those areas, that's why? ? the better the solution of the switch-off said that as jovandj ? a clean working environment.

[jovandj]

Just copy the table dtc from a dtc if the file qualcunoo fara

[panterargento]

Look, I don't know what to say, to me, for the moment, not by any error, make sure there is a few bits changed x am mistaken, the only advice I can give you ? the use of MES.
One thing I am very sorry, ? that no expert is in our help, maybe why? this ? a question solved in some other discussion.

[jovandj]

I uploaded the version with the only switch off and gave me the regeneration stopped clogging 327,50% and dpf light switched on in the picture no error, it seems to me in diagnosis, but I have not tried to make a replacement dpf and reset parameters autoadattativi sincerely just c I have a moment I have to try

[panterargento]

To me ? success just what ? success to you, then I have adopted that procedure, and I do not have more? light on and clogging of 0% in the diagnosis.

[jovandj]

I have to try and then load the map ori do I replace the dpf load the switch off, and then I do the reset parameters autoadattativi then you should be ok

[panterargento]

Exactly, remember to wait for 40 seconds, after the replacement dpf that after the reset, then start the engine only at the end of it all.

[jovandj]

Understood....c and a particular reason for the 40 seconds or just a precaution?? Another thing for the case known a minimum most regular of the method and time ecusafe?? There are other differences with respect to the time ecusafe? ?

[panterargento]

I don't think there is a particular reason, MES, is indicated only for the reset but I as a precaution, I have also done on the replacement DPF, then with regards to the rest, it all seems as before, but since I've done a few miles I don't know if there will be any surprises in the future, for the moment, I'm still testing it, the only thing certain ? that I do not have more? the light on + clogging 0% in the diagnosis.

[jovandj]

I understand...I c I did a 3 400 km with the light then I'm broke and I returned to how again now try again, doing as told by you, and verify
..thank you