fap

[anniver]

all going to be doing it on purpose this morning and came the same car with the dpf removed and when you turn the picture the lamp is not lit. I with the carsof... I made the file, cut why? I write with mpp loaded and the light comes on when the acc of the framework now, according to you, alfiuccio how could I check if it turned off?

[anniver]

Thanks or contacted the service everything is ok

[Alfiuccio]

I understand what you mean....but, again, the fact that the indicator light is not to say that you have made a good job.....the fact to turn the light off or not does not influence on the regenerations.....and anyway, you need to see the degree of clogging-the status of the fap - and the average of the last rig. must be set to zero....the sensor differential pressure law quiet....About the carsoft well some say it works others not....these sw do the job in half by tapping wrapped bit wrong....that's why I say entrusted to the online service because they know what they are doing and also files are definitely tested........

[anniver]

't know if there is a phone number for more clarification ?
or figured out I try to see the last regenerations how to made

[Alfiuccio]

are you referring to the online service? confirm your test.....

[anniver]

alfiuccio but it is normal that when I read the map with the titanium of the first torque limiter map 8x16

load/RPM(172) (4950) (11327) (18398)...........,.
13
25
38
50
63
75
88
100

why? the laps are not like all the other maps vary in an exaggerated fashion