rimmetto the first what have you done let's see if I can get him some small measure taking inspiration also from the second that you did, why? when it does not lack I like it just fine, and for now, I have not noticed increased fuel consumption, on the contrary, maybe it consumes less.
for the defect forget it, you have a problem, you maybe with the variable geometry..
on fuel consumption ? logical that consumption is very less.. you are not wasting even a drop of fuel without that is used!!!!
In a world of crazy normal is crazy
up to 90 % ? the catalyst is clogged, so I thought to try the second and then put back the first one for the fact that you said that we were probably over the limit and be careful of the clutch.
no excuse...put the second one and just don't make hacks.. and write how it goes..
In a world of crazy normal is crazy
go quiet.. the only limit is your clutch..if holding go quiet, if you see that slide at low enough to reduce to a few points in time.
In a world of crazy normal is crazy
Sati still trying the map???
Let us know something.
In a world of crazy normal is crazy
sorry if I'm gone, but I had problems with the ADSL connection, anyway the map I tried it, but it goes very slow, almost ori..***** and why is that?
it seems to me impossible that go very slow.. sure you uploaded the right file? as soon as I return home in the control file.
In a world of crazy normal is crazy
I double checked I put the right one, so I put the first proof that you had posted, but I notice that every gear change, especially among first, second, and third, by beating on the joints, I have to lower a bit the lim torque?
the only thing that you have to lower the time.. but if you lower it too much you have to delete the mod to the advance..
In a world of crazy normal is crazy
Write permission
Quote
