if you have problems email the file and let us help you with chk!
if you have problems email the file and let us help you with chk!
The file I have already? posted here: Ducati-Hypermotard-1100-ECU-Ducati-Performance-Exhaust-2-2
After the message edit with HxD, I carried out the reduction of the file 304kb to try it with the ECM, as I did for the original one which was recognized automatically with the appropriate driver from ECM Titanium, the mod is not recognized automatically, the what ? normal? Or in the modification of the message, I made mistakes?
Originally Written by ducati83
? normal as you move a bit is not more recognized by the tita
while the others are still talking about us, we have already solved the problem
GARAGE0864 ԼЄƓЄƝƊƛƦƳƧԼƛVЄ
I meant the modified file, the ori do not c'? need to fix the chk....anyway with mpps I have not,at least I have a chance? to correct it....
When the mpps returned me an error, I clicked on fix the checksum, I asked for the original file and then the amended and reported me that ? been corrected in 1 area. After which? I repeated the flash, by selecting the file that was just generated by the mpps ? match the phase of writing, time 20-25sec the process ? finished! I turn off the picture, that took me back three lines "---", then on again, and the mess of welcome was changed, the bike ? the game regularly!
Mauro, according to you, this mpps should not just generami the correct file?
Last edited by msport (exil77grande); 25-03-2014 at 23:50
I struggle to understand what you mean and what you have done. Try to be more? clear.
- my MPPS reads and writes correctly, but it is not the cks; your the ago?
- you have to read the file with MPPS then you have changed the startup message; and with what sw;
- have you written to the map file with MPPS, but it gave you an error; as you correct?
hello
I'm sorry if I was not clear! I try to describe all of the steps taken.
First of all when I tried to read the original map of the mpps I returned a error (kind of improper)which I solved as suggested by m999 changing the model of the bike. In my case, instead of selecting hypermotard 1100, I have selected the Hyper 1100s, fitted with the same ecu, and the reading ? come to a good end!
Having the files to 320kb just read, I changed the welcome message from the hex with the HxD, and save.
Ready for programming, I connect mpps to the bike, launch the soft and with all the default settings and the bike selected as read, I do first IDECU, which is read, and then Write. At this point, the mpps, before starting the erase, and then write, I issue an error and invites me always to contact via **** support.
I will make an attempt to reciprocate the model of the bike and I, this time, the hyper 1100 (the cio? my role model), re-writing and re-error.
At this point, before I disconnect everything and ask you the question, I put the bike on a hypermotard 1100S, and I clicked on the key chk of the mpps, the software asked me before the original file, and I loaded the bed, and then he asked me the modified file, and I loaded the one that is saved with the HxD with the welcome message changed. The mpps generated me a new file, I assume with the modified checksum, cos? I repeated the scripture with this last file, and ? come to a good end without any error, time 20-25sec and the ecu ? been rescheduled!
I hope I was clear in all my steps, now I would like to know from you how it behaves when you click on the button chk of mpps? Not asking you for ori and mod to correct the checksum?
Proof of what has been done:
Original message: HYPER RACING
Then after editing it I have to load the driver manually? Can I load the same driver that Titanium has read automatically on the original file?
Thanks
yes and yes to both questions
while the others are still talking about us, we have already solved the problem
GARAGE0864 ԼЄƓЄƝƊƛƦƳƧԼƛVЄ
Write permission
Quote