Big Problem C2 VTR Siemens SID 806

[Macchinista]

Hello to all. Unfortunately, today I had a big problem on this car. Days ago I read in boot mode, this ecu without any problem. Today I edited the correct file, the chk and written to the file by OBD. Since qu? all good writing ? come to a good end.

I try to do a start up, the car does start but does not start.

I try to rewrite the file ori from the OBD and this time does not even start. you only hear the most? take some rel? but nothing to do on the display and write system failure antiinquinamento.

I also tried to rewrite the file ori from boot mode. The writing is successful, but the machine doesn't want to leave.

I have read somewhere that these ecu rewrite the chk every time you turn the key, and if ? as I think at this point you should be disiallineate things.

And' already? happened to anyone?? Help!!!!

[guidotacco]

try to do a partial scodifica

[Macchinista]

With that software you advise me to do it?

[guidotacco]

meucci!or is it that you resetto the rolling code

[guidotacco]

I forgot,mail the file read in boot ori from the flash 29f400

[cinqueturbo]

With that tool to work?
this is the same as here not only the driver for the file?
E-mail the file ori and mod..
especially the read file in the boot...

[Macchinista]

You exact Cinqueturbo ? her. The file read is qu? bank data: http://www.professionalchiptuning.ne...ll=1#post85925

I read and written with Gall V53 is to boot from the OBD (Written) without any problem.

the fact ? even uploading the file ori goes ir?. Does nemme no start-up!

I tried to do the scodifica rolling code with the time but also cos? it does not go!

[jolidj]

according to me you should write to lori and try to do an alignment cn diagnosis dedicated.
if nn you can then calculate the possibility of that and the game when you've been given the boot.

[SandroMarciano]

I ? happened to me, to resolve this I have driven the citroen, where you probably have done some sort of update

[Macchinista]

Pan... Maleddette Siemens. This ? the report of the BSI made with autocom:

Report BSI.zip

The engine can't go with autocom why? I don't think it supports this system. But from what he wrote in the BSI is not ? nothing comforting. Missa I toccher? really bring it to Citroen and hope.