Replacement instrument panel ducati 749

[duca]

I wanted to share this thing with you to a friend of mecc. has mounted an instrument panel of an 848 on a 749, obviously, to get it to start I had to remove l?immo now the owner is me behind wants that when you turn on the framework for the exits the written sbk 749 now I was wondering about the ecu ? the 749 and the framework and the 848 you dide that if I work only on the control unit the I can change the writing I think not when those pictures work differently, in fact, the immo is them to the original motion and the control unit if the unmount and virgin advice from your

[maurof650]

I have already? made this change on a sbk 848 and I changed the message on the framework directly from the ecu.

[biondo83]

Open the file with the hex and replace the label that people such as power-on message (749) with SBK 749.

[cinqueturbo]

I wanted to share this thing with you to a friend of mecc. has mounted an instrument panel of an 848 on a 749, obviously, to get it to start I had to remove l?immo now the owner is me behind wants that when you turn on the framework for the exits the written sbk 749 now I was wondering about the ecu ? the 749 and the framework and the 848 you dide that if I work only on the control unit the I can change the writing I think not when those pictures work differently, in fact, the immo is them to the original motion and the control unit if the unmount and virgin advice from your

Currently what baits written?
for my desire of novelty? or open a file of a 748
: http://www.professionalchiptuning.ne...8&d=1377432202

[biondo83]

Currently what baits written?
for my desire of novelty? or open a file of a 748
: http://www.professionalchiptuning.ne...8&d=1377432202

The 748 has the instrument panel analog unfortunately

[m999]

Not only that, the 848 does not fit a controller 5AM... I confirm, is it can be? change it directly in the ecu, there you can? write what you want with the limit of 15 letters/numbers including spaces.

... must be a fashion, I also made these work on a couple of 999!! Delete immo to inhibit the control dashboard and change the ecu for the custom text on the dashboard.

M999

Sorry, I wrote 848 instead of 748...

M999

[cinqueturbo]

The 748 has the instrument panel analog unfortunately

Opss or wrong to write 749 of course..

[duca]

so friends just go at the address within the file and I can change to? on this if I'm not mistaken, not I could do the file is 320 kb, and the address was 4c110 I gi? I did a test but it was not make other attempts and see

[msport (exil77grande)]

I have already? made this change on a sbk 848 and I changed the message on the framework directly from the ecu.

Maybe you could give some indication in the pi? then.

[Dirdan]

In my small way if I can help, I run the same thing on the ecu of my Hyper1100, by modifying the Welcome messagewith the help of the forum!

The hyper is mounted on a 5AM, the 15 positions for the welcome message, I don't know if they are valid for all the ecu ducati with this function, in my case, for the Hypermotard are 4C133 to 4C141. Text edited with an editor HXD.