no no still qst solution I did not try, but I can guarantee that those posted already? on this discussion, on the ford edc16c34 1.6 do not work.
no no still qst solution I did not try, but I can guarantee that those posted already? on this discussion, on the ford edc16c34 1.6 do not work.
Excuse me ... how do you understand that don't work ? with the diagnosis see that the EGR is still working, or because you have left the error " ENGINE Failure " on the display ??
from the diagnosis I see that works
unfortunately I do still download the file.. I am a beginner.. these made about a 50 car between DPF and egr with the TIME ... .. all working the only prob ? with the DPF you have to do the procedure for setting the pressure of the system, otherwise the car is nn pi? in protection, but it remains written in the dash !! anyway, you see that line 1C4360 up to 1C43A0 you need to make a mod .. or you send me the file in private
and let's
..no, no ... I always respect the regulations ......I meant to tell you that I can get you the file ... but I can't download your GOLDS !! ..
try and let me know ..
Good Day, I inserted the file Ori and mod as suggested by leandro89.... you'll find it in the category of file Ori -- Ford - Focus ... try and let us know
Greetings
In the database, you had to enter only the origianle, the modified qu?, however, this test ? was gi? made.
If you have sfappato 50 cars with the time you have done a great troiaio, time does not work well on these cars as clear almost all the error codes and touch things that are not needed for a correct luca stanca. It only takes a bit.
For ecuboost those are the controls egr and should work, however I would take the duty cycle to the maximum value, as well as clear the controls, and you'll see that resolve.