the 500 Abarth 135->160cv

[dantesfx]

Hi,
are in possession of a file ori of the 500ST that you can find here in the database with the extreme version 756_100, .rar file from 294kb (Should be correct, no?).
As I know the Bosch in question you can? read only boot while writing ? can via odb.
The galletto v53 okay?Or, better, the mmps v5 (deprecated v12 on these engines)?

I have to buy it, so suggestions are welcome.
Tips on flash?I hear that it happens often piantino these ecu, even though the process of writing seems to be simple..Also the checksum should adapt automatically.

Thanks.

[legendaryslave]

you have to go all the micro, it's not only the flasks http://www.professionalchiptuning.ne...7129#post67129 caricagli this is already the full read in boot mode is made with fgtech, of course, the writing must be done in boot mode, if woi do one thing just to change the numbers in the e2p

I forgot the file from 2 mega

[dantesfx]

I forgot the file from 2 mega

Me they could send it away ****?The exhaust, but it says file corrupted.
Thanks.

[legendaryslave]

Me they could send it away ****?The exhaust, but it says file corrupted.
Thanks.

you can not download it because they still do not reach the threshold of messages not to be rude towards you but I can't passartelo for regulation ask the administrators of the forum or wait for the threshold of messages that if you participate in discussion with a few arrivals

[dantesfx]

you can not download it because they still do not reach the threshold of messages not to be rude towards you but I can't passartelo for regulation ask the administrators of the forum or wait for the threshold of messages that if you participate in discussion with a few arrivals

The point of it ? I had about 130 messages, are now gone.
In fact, the other that I had downloaded them I had taken from here.

[msport (exil77grande)]

The point of it ? I had about 130 messages, are now gone.
In fact, the other that I had downloaded them I had taken from here.

if you have been removed from messages and you have been deglassato a reason there will be,shooting a guess,maybe you are present in the forum only for the part of the download?

[giannimini]

guys , if I have an abarth with a 135 hp, and remedy the file that is read into the boot of the same from 160cv essesse, I can write the file to the essesse bed in the boot? (even if they have different software)

or if you retrieve a file in the database that go well with mpps, and then the ecm... and also change in 2d, with the values of a very of the essesse, then you can? rewrite? I read that mpps ? best 5 of 13 for these... ? true?

[legendaryslave]

guys , if I have an abarth with a 135 hp, and remedy the file that is read into the boot of the same from 160cv essesse, I can write the file to the essesse bed in the boot? (even if they have different software)

or if you retrieve a file in the database that go well with mpps, and then the ecm... and also change in 2d, with the values of a very of the essesse, then you can? rewrite? I read that mpps ? best 5 of 13 for these... ? true?

I answered you in the other post

[giannimini]

Ok, anyway, if you read the file in the virtual read, you edit in 2D and writes to the serial port you can? do not?

[legendaryslave]

Ok, anyway, if you read the file in the virtual read, you edit in 2D and writes to the serial port you can? do not?

riskioso in serial me ? locked ir? once