Opel vivaro 1.9 dt egr problem

[dejanira17]

have you tried to lock open the vanes of the variable geometry of the intake ?

[carlo abarth]

then the result????

I try to tapparla and see what comes out tomorrow. if I find where to put the plate, will update...
thanks

I did a test by putting a sheet on the pipe that goes to the valve, but with 3 holes by 5mm the middle of not ? changed nothing, the only thing ? now as the error always p0400 but instead of being excessive ? little and in fact does not erase it.
However, the means should not be just the way it should go, even so, can you please tell me when should measure the mass of air to the max?
I know that the minimum amount of heat must be from 35 to 47, and here we are, but at the max only comes to about 250, it seems a little bit on the 3500 rpm is so low

[motorsport]

happened to me and on a scenic 1.9 as well was closed gave me problems not accelerating slow start turbine that is not pushing black smoke at will
the deleted and put a strip of sheet
he is still walking as I would recommend you to do according to me.

and the best solution!!!!!