Reading the lancia musa 1.3 mjtd file from 3mb?

[cinqueturbo]

Sorry, but when you start up the SW of the cock does not appears to you a attention?
and then in the top right corner flashes used or not used on the picture of the adapter?

[ugoboss]

I'm sorry as I have to see it to recognize whether to use it or not this I mean

it is a discussion that's already been done at other times, and honestly makes me a little angry, because it means that you work without seeing what you do, when you select the drive you, says the program, if you look at the image you posted ec written use-it , when it does not take ec, the image of the adapter with a cross over, but always start from the idea that in the obd wants us to be, then in the folder fgtech there are a lot of documents to read before starting to use the interface, why cry after you have made the omelette is good for nothing, after you shell out the pennies to remedy a control unit, or a new programmer because you cooked.

[eobdexpression]

it is a discussion that's already been done at other times, and honestly makes me a little angry, because it means that you work without seeing what you do, when you select the drive you, says the program, if you look at the image you posted ec written use-it , when it does not take ec, the image of the adapter with a cross over, but always start from the idea that in the obd wants us to be, then in the folder fgtech there are a lot of documents to read before starting to use the interface, why cry after you have made the omelette is good for nothing, after you shell out the pennies to remedy a control unit, or a new programmer because you cooked.

But in my case it is because the item use it c'? no?

[ugoboss]

But in my case it is because the item use it c'? no?

do what you says the program!!

[eobdexpression]

do what you says the program!!

Ok thanks ugoboss of the info I've I've used it with the adapter just because? I figured to use it and anyway now riprover? read it with the protocol of the 70 hp and not 75

Guys problem solved at the end the problem was not the rooster but bens? the owner initially told me that the car had 75 hp and read the whole gave me a file size that is strange precisely 3 mb that and then bringing it to 448 I also compared it with the file ori I realized that it was a mod file, and then today I tried again to read the map with a profile of 70 hp and muse, and I pulled out a file in the tables to be 64 kb and the whole is always 64 kb (Instead of? 448kb) so there was something abnormal, and then I decided to disassemble the unit to see what mount, and wual? I discovered that the car had replaced the ecu by putting always one of the multijet 70 hp but the fiat idea that despite being identical, change the protocols, exact for reading and writing complete and entering the driver of the fiat idea has me bed in both tables (64 kb) and the full (448 kb) the file perfectly so I edited the file golds that I had procured, and that's it written as a whole without any problem. I hope this discussion is helpful perhaps to someone else who may suffer the same situation.