k-tag info

[elabotuning]

hi all, could anyone give me some advice on the k-tag? and could you tell me what differences there are compared to other interfaces? thanks!

[guidotacco]

it only works on the bench

[legendaryslave]

It programmer bdm jtag boot-mode-the-counter for the engine control units

[giordano_mecc]

The K-tag ? a programmer-the-counter that works in the BDM (MPC555) in the boot between the tricore and the j-tag for me ? the best reliable and safe to advise absolutely certain it goes then added a serial port to the ecu that do not provide the systems mentioned above.Hello

[robby51039]

hello,I have a question too, you can use the schedule for bdm bdm with k-tag?

[gezame]

hello,I have a question too, you can use the schedule for bdm bdm with k-tag?

Hello
Have the same schedule of cmdtec.

[fuorigiri12000]

Just a nice topic,
I think it is the only way at this time to work with the ecu pi? evolved.

[rdponline]

It is in fact in addition to CMD, and one of the tools more reliable.

[gezame]

Hello
Yes, but the cmd is not working with renesas, etc.

[frantik3]

Hello
Yes, but the cmd is not working with renesas, etc.

if you purchase the protocol works