How to make a good weld on an eprom
How to make a good weld on an eprom
Unshared knowledge remains an end in itself.
flux before soldering and contact cleaner to wash after weldingOriginally Written by admin
That is the function of a flux on the welding, since that has to be used first.
removes residues, but especially when you use hot air ? essential because is out of the pond with ease? on the slopes
also a firm hand, welder profrssionale and the pond at least 60/40
of course, I can still view the manual...
for years I worked as a tester and repairer electronic equipment,
and I can say that with a good soldering iron with adjustable temperature and as said sa80****** with a steady hand and a good pool
levi and put it in without a lot of problems...
in case you are on a device where the heat is absorbed much leaving the integrated cool with the consequence that the welder attaches and the pond is immediately hard...
the only way out, if the house does not have any professional equipment you can? avoid using a hair dryer....
It heats up well the part dispeller in such a way that fails to dispose of the heat quickly,
and as for the magic of the integrated will be? via without many problems...
for welding after the removal, you can perform the same procedure....
ok thanks a lot
we avoid this type of spam for aumentarte the counter of messages because so much back to back.
[IMG]http://bannerbreak*****/banners/3/563/135700419269659378.gif[/IMG]
Depending on the type of eprom adapter and you can? also think of using a preheater as in the stations, infrared, surely ? very expensive as a soldering station, for? for delicate things ? the ideal. I have had the opportunity to see with what simplicity? was unsoldered a chipset on a motherboard. That surely ? keep in mind, the rest of the people who spend thousands of euros for equipment for official pu? afford to spend at least a thousand euros for a station infrared. As you rightly said the other must be also, the pond, the flux and all the rest of quality.
One of the next purchases will be? surely a station infrared.
I explained some of the terminology and material? I do small jobs but I'm sure that exists in the trade material that makes it much easier to work...
thanks
Write permission
Quote