as the title someone can? give me a guideline on how to eliminate the swirl on qst drive
as the title someone can? give me a guideline on how to eliminate the swirl on qst drive
Last edited by msport (exil77grande); 06-01-2014 at 11:10
Hello Ecuboost port 0 from the 0E5AB4-0E5BFC and test..Originally Written by ecuboost
with what lai read?
if lai is read by serial do not trust..
made a backup first with BDM..
or had a problem a while ago with one of these..
I confirm to you that the map ? that...I run on a 120 hp, and for some time he turned on the light engine and then ? all went well. Read and written in the bdm.
I have not made a diagnosis later why? I have reported the car but the car is fine even when the light comes on.
The problem is to maintain a speed of thought is faster than the speed of the machine
ok thanks, I try, and then I read in the bdm?
That and better!..
not to be pedantic, but before doing this you are assured that the butterflies are safe in their own home and not escape some in the suction bending everything???
Guys just yesterday, the kind he called me because the car does not pull, the diagnosis of tongue-butterflies and circuit candellette with light engine turned on. I think it is broken, the motor of the butterflies, but I don't understand why it doesn't pull...in next week to see what I can do.
The problem is to maintain a speed of thought is faster than the speed of the machine
I have placed some of those. What should you do ? disassemble the manifold and close the holes, of course, after you have removed the swirl, given that on several of those skip everything and remains the open hole, and close by the control unit serves little purpose, especially if the car has more? of 100 to 120 thousand km. If you have one you can spare them all the mange and install one of the fiat 140cv that ? identical, apart from the swirl. Of course, the starter motor must be operational and in place.
hello but you butterflies, you have removed?otherwise if they remain closed ? for what the car fails to climb rpm
They brought me the machine after you have removed the swirl and with motor attached. I have 2 with the same problems, I have to make a diagnosis and see well the error codes, if I can do it in a day.
The problem is to maintain a speed of thought is faster than the speed of the machine
Write permission
Quote