silicone to seal the ecu

[sportknight]

They told me that the black pasta leads the current ? best silicone...do you know something?

[leandro89]

They told me that the black pasta leads the current ? best silicone...do you know something?

can I refute your supposition as to a control unit of a truck if the abs-ecu, in the edge of the cover there was a copper wire that somehow was the link mass, no ? noticed and we closed the unit with the black mastic, we were going crazy why? the light that before was not turned on after that we mounted the whole thing was turned on, the moral of the story, removed the mastic light off.

[spatullo]

Hello all, sorry if I say nonsense, the black paste is not acidic and will ruin the ecu?

And not have to spread over the entire card. You put very little and only on the edge of the metal.

[MarcoG3092]

I used the black mastic, what you use for the glass...

[sportknight]

the mastic for the windshield, not the necks pi? however,I want to see when you go to make changes

[alfajtd]

They told me that the black pasta leads the current ? best silicone...do you know something?

? a hoax..

[MarcoG3092]

the mastic for the windshield, not the necks pi? however,I want to see when you go to make changes

Auauaua, do not open it more? I leave it so? and that is it.

[claudio-abarth]

but before putting the new siggilante,the clean from the old one?

[MarcoG3092]

I have deleted the old sealant grattandolo away with a scalpel.... but also a blade of a knife goes ir? that's good!

[sportknight]

I don't,usually the old one reincolla with the heat of the engine