Check nn is part of the family edc16+? And then if I write the file that I read without changes to check it nothing should go to the rule or am I wrong?
Check nn is part of the family edc16+? And then if I write the file that I read without changes to check it nothing should go to the rule or am I wrong?
Read what c'? written in the post of legendaryslave, says that within the EEprom c'? a system rolling code, which is synchronized very definitely with the immobilizer, with each power change, practically c'? a virtual eprom in the eeprom that contains the flash file, the original file is not ? pi? valid, as the cycle and changedOriginally Written by crteam
The patience and virtue of the strong..
ah that's great, I knew this, and then what to do?if I do the scodifica what can? happen?I had to do delete the egr as I had to do then?
for? valid always the last file then nn should start by writing the files that started?
Last edited by leandro89; 13-11-2013 at 02:22
in fact, winols when you open the file warns you of this and sends you to the site explaining this thing, but am not sure there is a ep2 I ripristinerei all in as the starting
while the others are still talking about us, we have already solved the problem
GARAGE0864 ԼЄƓЄƝƊƛƦƳƧԼƛVЄ
but, in fact, I'll explain I've read the original file I have it saved and I opened the ecm to check cks and if tt was ok.then after I opened it once to see if I was deleting the egr there was the I have done,check cks and it was not ok.I have corrected it and then ok.I have rewritten without control cks of the cock,I put the ecu and the nn part and attack the fans and entering in the diagnosis of mi, cm fault programming error control unit now nn remember the code.then I rewrote the file golds that I have read previously and wanted to learn more to share.st? thinking of scodificarla at this point and I need to see if you can? do
yes I agree with you but there must be a reading of the eepom 95320 to try to make a vergin ecu
while the others are still talking about us, we have already solved the problem
GARAGE0864 ԼЄƓЄƝƊƛƦƳƧԼƛVЄ
if ecuvonix I partial to the e2p should I solve it?you can check if the file to remove the egr and done well?
guys today I have broken the ecu but the eeprom nn find it...
what you have achieved by the decomposition of the reading of the bdm?
The patience and virtue of the strong..
guys always remember that these units by opening them to do reading in the bdm many times not to go more to go on, and fan does not start, many times they are cut down to read them without opening them, I in serial with the cock, I have made dozens for the egr, and I did like the user, the bed changed and rewritten everything is ok, for me the problem comes from the opening.
ugo ---- president A.E.P.
Write permission
Quote