Failure P0091 Fiat Bravo 1.9 150 HP

[bravosport150]

danny, but which screw are you referring to? How did you extract the filter?

in the fourth picture you can see the plug (the green part) of the pipe that goes from the fuel filter to the pump Hp, which I have detached.

[danny677]

look, on the gpunto 1.3 ? obviously different because? here, don't I recognize anything
and is also at the top is driven by the camshaft

[bravosport150]

I surrounded with red pipe that comes from the fuel filter to see that ? the one with a connection to the plug on the pump:

[engy]

I saw the photos then? I can not read the number of the pump,see if you can legerllo, begins with 0445110--- see the last three numbers

[danny677]

in the last photo, at the end?, at 90 degrees c'? a nut that seems to be blind, could be the equivalent that contains the filter

[nasone147]

sin the topic has been abandoned,it would have been useful to me.

[tidus1985]

what's your problem??

[nasone147]

Hello Tidus :-) x good luck ? a lot, if your not s is pi? live, but several times this error ? come out to me!!-.-

[tidus1985]

then, many users have fixed the fault with the new map, if it is original then I would say that has to be carefully controlled pressure regulator and rail sensopre

[Elettrico]

I am x pi? to clean the pump of the instrument panel and already successful in my case. I put the gun in the air in the tube that is located in the engine toward the instrument panel to the return, of course, after a big blown or reassembled everything and the car was flying and lasted for a week, then point and**** but I realized that the instrument panel was full of schivezze clean and everything ok.