read delphi dcm 3.2 or 3.5 mb w204 c

[faberecu]

Which hardware to use between bdm 100 galletto 2 54 or obd

[frantik3]

53-54 in jtag 54 in the obd

[munro]

jtag and bdm are therefore the same thing?? always on the pcb you need to be with the template and the appropriate schedule?

[frantik3]

no, they are two different things

[ugoboss]

jtag and bdm are therefore the same thing?? always on the pcb you need to be with the template and the appropriate schedule?

always read through the pcb, but they are two different protocols.

[munro]

ok guys...I wanted to ask the cock v53 this car to make luca stanca most possibly the map from jtag can do it all??
I wanted confirmation if possible.

[infinityecu]

ok guys...I wanted to ask the cock v53 this car to make luca stanca most possibly the map from jtag can do it all??
I wanted confirmation if possible.

That I know of with gallo 2 go quietly then the luca stanca and the map are things apart once you have the file read

[alfajtd]

The cock does not do the sw 2011
It takes at least 2012...
You have to see if you actually have to
Jtag nexus makes

[sportknight]

with jtag you can weld a dozen wires on the pcb of the controller...

anyway, these are the make jtag to the tour but I don't know if you can even write in the serial

[alfajtd]

There are 7 wires with the jtag,

Via obd kessv2 the ori reads and writes.

Here we speak but a chicken clone...
If no one has ever done it, you can do is try..