guys but back to the cock...what do you recommend as my first purchase from beginner, v52, which is very easily in italy or the v53 that very probably will have to? order it from some chinese website?
guys but back to the cock...what do you recommend as my first purchase from beginner, v52, which is very easily in italy or the v53 that very probably will have to? order it from some chinese website?
Hello daniel, the clone must be really good even why? there are thousands of versions that they sell, and then are ciofeca, I can tell you that my cock v2 that I bought at the price of 250 euro including shipping ? great and up to now I have worked both in serial and to tour in the bdm and possibly happen to a malfunction of the apparatus can count on a support, why? send it directly to the mother house where they make themOriginally Written by danielecolantonio
Hello I am Joseph I took a galletto v53 and when I have some problem with the Magpro 4.2, Mpps 13.2 the figure and for ever the cock.
I believe that the Kess is specific to some of the cars that now I can't remember.
the only problem of the galleto that I could not get it to work bench
Hi Peppino, I do not know where and what you bought but you have to know that the galleti v2 clones good really should function in both bdm or a tour through a serial (eobd) and I can assure you that with my up to now never had any of these problems :-) Then the versions really for the clones do not exist why? what does it matter ? the chipset drivers are mounted inside and the programming that they have on the inside of the card ;-)
for what I understand I have told who to me sold, and only the settings of the pc in the English language, etc.. and that in any case you program to a memory of the HW through the program, I was able to get it to work in the obd but on the bench I gave up, maybe my PC has 2 gH as I explained, and as on the LAPTOP BRAND DELL
Peppino a hardware and a software if they are done well must operate, and simply does not exist, that part of it works and some not, and that program that you have defined them do not ? other than the usb fix and then if ? the version v53 as they say on another pc is not allowed? work but, again, according to me, all bagianate even why? my friends who have remitted the money, unfortunately, I have seen many then what counts ? be lucky to find the honest seller that will give you not say so much, but at least a p? of assistance and, subsequently, a product that works 100 % :-)
And then for programming I don't mean the program that you mentioned you on the post before, but a fully set up all the parameters to the factory or the manufacturer itself used to be able to operate the controller with the specifications that go to read about the product...........
Last edited by leandro89; 31-10-2013 at 14:15
however, now the news? with the new applications on the laws that he has decreed the Mountains,
all of these interfaces to map the ecu is not going to help more?, except for the strengthening of the engine.
The workshops are not authorized will have access as the dealerships
I'm sorry, peppino I have not well understood the fact of the programmer with the laws of the mountains
Write permission
Quote
