Hello and good weekend to all..
who gives me some info in pi? on these ECU Metatron?
type
reading, writing,
s? year Immo,
where are the Km,
Etc. Etc.
Just for info..
Thanks..
Hello and good weekend to all..
who gives me some info in pi? on these ECU Metatron?
type
reading, writing,
s? year Immo,
where are the Km,
Etc. Etc.
Just for info..
Thanks..
the metratron if I'm not mistaken is only for the gas.. mounts a 59f-5af under the filter of the air... check and let me know
you cicciocar..Originally Written by cicciocar
I only wanted the info in the pi?..
type there a way to read the map and correct it?
also their year immo?
I know that logs the Miles, where they lived?
I also try how to read... because it happens that they break the sun
I have a very open.... but of info a few well..... it seems to me that there is nothing for them to do at the time.... and the management of the maps are copied from the gasoline ...
it would be to lose time .. but at least I have little or nothing..
I have just bought a fiat panda Natural Power, and not, I have to admit that the idea of "touch it" ? coming to me
I have prepared already? a file for the 5af, but still I write.
I'd like to make it go like a normal car!!!!!!!
I have a Punto natural power with control unit metatron for the methane and a Iaw 5af p3, I read the ecu with mpps v12 through the driver to the Iaw 59f, I gave a pretty early with regard to the power, let's say that it goes a little better, the problem ? that remains the light ecu engine turned on when I walk to gasoline, I don't remember the fault code, but I get the ecu is defective.
If for? I put back the file ori the whole system, c'? one thing that I can not figure out for?,the Metatron copy advances, but as far as the injection timing I don't know if it is based on those of the iaw, or has a map to s
Write permission
Quote