That the interface writes the ENTIRE eprom from the obd?

[Nitro]

Raga, I have a Focus 16c3 that hangs out with a lot of ease? when the map and every time I have to go to Ford and spend 70 euro.
The BDM, after a bad experience, I don't even want to hear appoint for a backup.
For? I have heard of people that resets the blocks from the obd.

So my question is ? the following: which interface ? able to read (and write) all the 3 files that are read in BDM directly from the obd? At that cost you can? get it?

In the alternative, that the cost to go from a guy that resets the errors?

[ecuboost]

but interfaces that read everything from the obd, maybe there are...to reset the errors that you want to say? remove the dtc?

[passione motori]

Hello Nitro, your edc16xxx ? scabby with tool ori, that I know there is a tool but it's only Siemens and marelli

[Nitro]

I do not intend to delete his fame but remove engine failure when I write.
The Ford and capable, from the serial to enter in all the parts of the control unit. I know why? I have adapted the ecu socket to collapse.
Then I know of people who claim to be able to reset the ecu in error without bdm. I read somewhere that using another protocol (and then the other interface)

[msport (exil77grande)]

Take a kess v2 and you are quiet.

[Nitro]

Maybe I explained it wrong. I mean errors in the compile the map that they can send in the recovery unit, not writing errors. The kess and capable of remedy to these?

Or once I have selected the ecu is wrong (they are not stupid. And a long story to explain) with mpps v5 and at the end of writing the ecu was working but the car was in recovery. I could restore with the kess?

[Nitro]

For recovery I mean malfunction indicator light engine turned on, written engine failure on the dashboard and the machine that works with limited performance. All non-resettable via obd (the error I can see it but you can't delete)

[sno74]

post the fault code and see why? do not remove if you do not cancel ? this then you don't need a toll, but understand what ? the failure.....

[sportknight]

sorry but do you want a generic diagnosis that will erase the error at this point...

autocom!!

[ugoboss]

Maybe I explained it wrong. I mean errors in the compile the map that they can send in the recovery unit, not writing errors. The kess and capable of remedy to these?

Or once I have selected the ecu is wrong (they are not stupid. And a long story to explain) with mpps v5 and at the end of writing the ecu was working but the car was in recovery. I could restore with the kess?

for me, you and nitro are you doing a bit of confusion, what you are looking for good or bad, almost all of the interfaces, the mpps has the writing of recovery, the kess (I do not know well) say that she has a recovery function really good, but it depends on the type of lock that has the ecu, many times you fail, even with the official diagnosis, then every case, and' if'.