The map seems to be ok though...

[ugoboss]

my thoughts reflected in the sandromarciano, the map can like it or not, but you have to listen to it, you have more than 180 points of turbo, naphtha enough surely, ok he has not touched limiters and press. rail (which is not always convenient touch), but if you do not hear the difference there can be some other problem.

[msport (exil77grande)]

The answer I had given in private gi? to the moderator, I repeat it here.
I illegal things I do not do. Then I have to admit that the focus and mine, but I take off the Cap and put the map only when I go on the track... And the shot only in Germany
I think that as the explanation is sufficient, and I would ask you not to write in addition to not further amplify the news.

Since I'm going to go talk with the one who has done the work, could you confirm that +200Nm (max) of torque and +10km/hvdi speed? maximum values are the cos? low we could go to to complain?

To which the moderator?
Can I know how old you are?

[Nitro]

To which the moderator?
Can I know how old you are?

I tried to write it in pm to the first one that pointed out the discordant of person that I believe to be a moderator but it gave me the error message box is full. Cos? I clicked on the triangle in the bottom left of the same message, and I wrote.
I had done the same on my message duplicate on the same discussion, prayer, and delete it. Having been deleted, I deduced that
Both of my 'private messages' were beds

I am 32 years old. The et? the minkiaggine and long passed if ? what you wanted to understand.

Thanks ugoboss for giving your opinion, but above all, it argued. Orw I understood what you wanted to say.
I remembered that the cable obd f-super gave indications on the torque detected. As soon as I can I do a test and will update.. Night

Test done. I found 264 Nm of torque(pretty much the original pair)
Having fear that this figure was distorted by the changes in the map, I also measured the maximum value of fuel injected per cycle (

Mf Des)? 51 mg to about 2500 rpm. This value for? to me it says nothing. What do you think?

P. S. Thanks for the time that I have been dedicating.

[faberecu]

you've removed the fap or you have made the holes ???

[Nitro]

The barrel that contains the Fap opened, emptied, and inserted a new catalyst ford, the replacement of the 90 horses without Fap.... of course the world only, and only when I go on the track

They have been edited only 2 of the 4 curves of the torque limiter. Someone can? check if the ori could be the cause of the problem? (and maybe tell me each of those conditions is used). Thanks

[enzopezzano]

If you have paid for the map you have to go to those who put us in the hands. And only 1 month that you have done the work!!!!

[maxsek]

the difference you should feel.....try to see if your system works properly ......attacking a diagnosis and see if all the values in objective corrispondno to the real