hi all.. I have a problem with this car... in a few words, and was replaced the power steering pump complete unit... connector (revised ) but the car does the same defect, I opened the ecu of the power-steering pump route, and I noticed the relay route, the carcass on top elaterale... then I noticed that also fits a 95080..but I need to do the swap of the e2p ?
I do not think it necessary to make the swap of the eprom.
maybe in the eprom there are recorded the settings of the sensor, steering angle and stuff like that.
all data that the ecu learns after the mounting
[COLOR="#0000FF"][CENTER][B]In life you never stop learning![/B][/CENTER][/COLOR]
[CENTER][COLOR="#FF0000"][B]I do Not answer to private messages with requests for help! If you need a hand, ASK ON the FORUM!!![/B][/COLOR][/CENTER]
+1..., data type, engine, equipment (ABS, ESP, etc) ... TRW directions electric Renault, in some models, ? the engraved code immobiliser.Originally Written by magi1984
If you explain the symptoms of the fault could acesorar slightly. Greetings
p.d.: ****** traductor espa?ol-English
have you tried to hear which ones you have given the pump revised.......
thank you for the answers to the review they say that everything is ok and has been controlled
so says the magi, and even, should I do the swap... the only and check the wiring.. but the 12v seems to come...
for the case you have the pattern?
if you tell me the year and engine type does not guarantee you 100% but probably a schema that I can recover it
Write permission
Quote