Hello..sorry but I was not referring to your ecu.
See post #7 and #8, where max75 solved by replacing the antenna, I would like to understand the why?...what does the antenna??
have you checked pin power and ground on the ecu you are ok..... if the code is not to be the diagnosis should enter otherwise you have to do a tour with connection diagram....
have you checked pin power and ground on the ecu you are ok..... if the code is not to be the diagnosis should enter otherwise you have to do a tour with connection diagram....
I repeat that I have read and written to the ECU on the bench... now I try with a file found here on the forum, tested and guaranteed to still ? the file that I tried that does not ? good