Page 3 of 5 PrimaBefore 12345 LastUltima
Results 21 to 30 of 42
  1. #21
    THE AVERAGE USER L'avatar di frantik3
    Date Of Registration
    Jul 2012
    The resort
    Tuscany
    Messages
    610
    try putting the original turbo or diminuiscilo a bit, or lower the pressure of the boost even if you don't you have touched abbassala some type 5-6 %

  2. #22
    THE AVERAGE USER L'avatar di david
    Date Of Registration
    Apr 2013
    The resort
    the province of cremona
    Messages
    113
    the log *********** have been made with the original map, no dpf, no egr, no swirl..

  3. #23
    THE AVERAGE USER L'avatar di polini
    Date Of Registration
    Jul 2012
    The resort
    NA
    Messages
    419
    since ? a automatic I abbasseri a bit the couple, or would delay rpm increase...

  4. #24
    THE AVERAGE USER L'avatar di polini
    Date Of Registration
    Jul 2012
    The resort
    NA
    Messages
    419
    I had a problem of recovery on a drive the same, and it was the solenoid that operates an overboost.
    Changed and fixed everything

  5. #25
    THE AVERAGE USER L'avatar di david
    Date Of Registration
    Apr 2013
    The resort
    the province of cremona
    Messages
    113
    ok thanks...

  6. #26
    THE AVERAGE USER L'avatar di david
    Date Of Registration
    Apr 2013
    The resort
    the province of cremona
    Messages
    113
    with your report of the turbo... I went to look around... and I saw that I have a great trasudo from the tube ic....
    can it be that I have soiled.. the actuator.. and it doesn't work as it should??
    I can't see him.. I should watch from the below.. in the meantime, I enclose 2 photos..
    Immagini Allegate Attached Images

  7. #27
    THE AVERAGE USER L'avatar di david
    Date Of Registration
    Apr 2013
    The resort
    the province of cremona
    Messages
    113
    dusted this discussion..
    at a distance of 8,000 miles... and 4 months ... I have not had a recovery... (finger tip.. hihi) the car now and no egr no dpf and no swirl... everything has to be detailed and physically...
    ie.. plate on the egr and dpf..... in the garage.. and swirl removed..
    according to me... the problem was just the map at this point.... because it has no more made jokes...
    I'd be tempted to load another... but I'm afraid.. go still in recovery...
    if it was the map... what could it be???

  8. #28
    THE AVERAGE USER (OF) L'avatar di motorsport
    Date Of Registration
    Jan 2013
    The resort
    campania
    Messages
    1,110
    Good question e-mail ori and mod!!
    You do not really understand something until you can explain it to your grandmother (Einstein)

  9. #29
    THE AVERAGE USER L'avatar di david
    Date Of Registration
    Apr 2013
    The resort
    the province of cremona
    Messages
    113
    the ori and in the database .. the mod and on the first page..
    however, in the first page.. you will find the link to the database...
    this mod posted... gave the recovery 100 km after you have loaded...
    and always at the time of release ... i.e. after having given up the throttle... (engine brake.. and' auto') ripredere the throttle and I was in recovery without lights...

  10. #30
    THE AVERAGE USER L'avatar di eobdexpression
    Date Of Registration
    Dec 2013
    The resort
    Mascali
    Messages
    170
    Hello I inizieri to make a map completely from scratch just to try to improve the yield and to avoid the recovery if the problem ? caused by the map. However, have you tried to connect the self-test to see if while if it goes into recovery, that kind of gives you the error?

Page 3 of 5 PrimaBefore 12345 LastUltima

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •