Alfa 156 1.8 TS and lamp drivers.

[rosspigna]

Hi to all. Attention!!!! they're not kidding with the explosive charges!!! don't even try and say why the resistance with a multimeter, you could trigger the charge. You can safely delete the errors and see if you still. You can try to disconnect the airbag control unit and the connectors of the charges and try the continuity? of the system. if you find a serious professional avr? resistance the sample to be put in the place of the charges, this ? the method of ir? sure. But NEVER try the strength of the charges, DANGER of EXPLOSION.

[sebastiano345]

hello, I am 99 %the plugs under the seats,pulling forward and back the seat for a moment lose the contact,once you are registered, the error does not cancel it alone, you need to reset you with a diagnostic,I usually delete all the wiring soldering the wires

[sebastiano345]

I forgot,there is a procedure to be taken to control air bag pretens etc... disconnect the battery and wait 15 min,and read what he wrote roospigna(I)not to invent measure in ohms something,if you don't feel like or are not practical to leave it and take to a car electrician who has a little experience,you spend 50 euros, but you don't have to redo the teeth or, worse still, an accidental explosion,hello

[aldinik]

Yesterday we tried to clean the contacts of the plug of the pretensioner of a seat belt, but nothing ? changed. The mechanic has thought of replacing the whole group belt.. but for now, in the collapse, was not available.
*sebastiano345
kindly could you tell me more? precisely where are the plugs under the seats?? anyway to me the error from the driver's seat.

[rosspigna]

Hello. The error that you read ? on the pretensioner lh. Well if I remember correctly, the charge of the belt is located in the winder of the same, so you have to remove the covering of the steering column and test the connection.

[aldinik]

Hello. The error that you read ? on the pretensioner lh. Well if I remember correctly, the charge of the belt is located in the winder of the same, so you have to remove the covering of the steering column and test the connection.

This is what we have done, we have verified the connections..clean the plug and the contacts, but the error remains and, of course, the light is turned on. H approved to delete it but nothing to do.

[rosspigna]

I'm sorry with regard to the connections under the seat are the ones of the side airbag warning light safety belt.

[cristianbomberos]

Exact definitely solve watching as cicciocar the connections under the seats

[aldinik]

Just back from holiday my friend ..we will check the connections under the seats..but it seems to me that should not affect the pretensioner lh. BoH?

[sebastiano345]

under the sedile.guarda with a lamp, there is a black housing plastic ,try to make a diagnosis and post the error code, if no don't you understand where to go