opinion the map alfa 159 1.9 q-tronic

[david]

hello..
I ask for an opinion on the map that I made for my 159... and pretty light... and the advances have not been modified to my own will..
I accept any criticism.. the file ori and' in the database of the forum.. and to be precise a edc16c39 576_754
the car has automatic transmission...
I tried... and it pushes pretty well... only flaw.. in the evening with the car behind and lights on.. I see a little smoke..

I enclose a map...

I forgot... the car has the egr pipe closed .. no dpf... and swirl removed...

[davidehfnos]

Hi the map and light, but can be good,for the smoke and normal because now you're no fap

[david]

thanks david.. (hahaha homonyms...)
so I can keep it.. no damage... thanks..!!

I saw that and was downloaded by more people...
we also accept other opinions...!! and maybe some advice to squeeze a few more horse... without exaggeration... because of the automatic transmission..

[jolidj]

you posted only the mod?? prune the ori. you have more possibility that you may have to give a hand.

[david]

it seems to me that by regulation.. the ori should be posted in the database... and there it is..
to make it easier.. I put the link...

should be this... http://www.professionalchiptuning.ne...9&d=1339922984

[msport (exil77grande)]

let's say that the rail can go,the limiter, but you could make it a little more low pressure turbo ok and limiter, but also the latter's high for no reason,the map of the pedal and of the times it can go, but the policy is not to be,so you won't have a shot progressive,but a simple surplus of power,for the rest abasserei the torque limiter, and I would start a bit later.

[david]

so.. let's say that I exaggerated with the limiters... the rest is ok... (thanks)
for the torque limiter.. let's say that it was a test.. usually I get up around 2000 rpm.. or a little less..
let's say, to adapt the map the pedal to the torque limiter.. I wanted to do this test.. because now the original has a lot more pedal set value of the limiter (below 2000 rpm) the difference that I noticed.. is that touching the throttle at low speed.. most loose.. ie.. salt..
now I would like to have a little more of brio.. around 2250/2500 laps... having removed the swirl physically.. I feel a slight decline (in the shot)... how can I solve this problem??

[david]

hello..
I have a problemone... as the previously loaded map on the car (there is on the forum) as well this causes me the recovery without lights.. (10 min ago)
what can it be...?? the original no problem.. while this and the previous... I create recovery...
the sensor prex differential.. and disconnected from the dpf.. and is also deleted from the map and then I...
what can be??

[msport (exil77grande)]

hello..
I have a problemone... as the previously loaded map on the car (there is on the forum) as well this causes me the recovery without lights.. (10 min ago)
what can it be...?? the original no problem.. while this and the previous... I create recovery...
the sensor prex differential.. and disconnected from the dpf.. and is also deleted from the map and then I...
what can be??

sorry because the sensor is disconnected?
and because they exclude as a problem?
according to me the problem could be just him being unplugged,and also with what you did the luca stanca?
because you go into recoveri without any warnings in the diagnosis just because the luca stanca is done with the usual sw delete the whole table of dtc as a consequence, any problem you have does not give you any indication.

[david]

I mean the tube of the pressure that comes from the dpf.. and disconnected... the sensor still has the connector attached.. (still doing the recovery to be without... the first one I had it plugged in) and pressure is a- * 1 mbar (like when I grip)
the luca stanca.. and been done with ecusafe 2... I tried one swich but I'm not good in the diagnosis... (I don't know if you remember).. I had the luca stanca with time (but equally recovery)
unfortunately... the recovery it is only with these... or other mod.... whereas if I put the original.. and only without the dpf and egr.. this is not the case.. okay..