I ? happened this strange thing... a guy took of a control unit used Marelli 5AM-HW610 Ducati that came from a Moster695. He has made it to remap from the classic "friend statement that you would recommend I" (unfortunately, I could not understand with what kind of HW/SW) for his Monster S4 996cc. Capacity to be installed by a guy in my area that smena on the Ducati pretty much always been, and with whom I work, the bike didn't want to leave. I'm going to take a look, attack diagnosis (use a package Technoresearch VDSTS) and - surprise - to the test of the candles as it turns out, are reversed!! Thinking of a incasinamento of the electrical system will retry the original unit and everything came back... ? then jumped out of the ecu in question has the command coils reversed.
The first is to put his hand, I clearly downloaded the SW present in the flash, but from what I have seen comparing it with a similar one that I had in my collection, they are equal. As you hinted, it's not? with that package SW/HW ? was made, and then remains a p? an unknown, but according to me something is wrong in the e2p, where instead it should be the management of the hardware of the control unit and that ? was messed up at the time of the closing in writing... as soon as I have two minutes of time I try to download the files to 320kb of flash that maybe I miss out something, but I have my doubts.
I thought I would recover it in toto, writing to him, a generic file Ducati 320kb in boot-mode so try if you can to re-establish something, otherwise I think that remains the only solution to read e2p, check with a similar one to study and understand the problem, and then rewrite it correctly, and then resume with a map to fit and made to modino.
This ? the file I read:
What do you think?
M999
Last edited by msport (exil77grande); 09-08-2013 at 10:20
Quote
