The ALFA 147 , error P010F

[alfajtd]

remove the flange...
clear errors...

[guidotacco]

check the plate that you used to flagiare if ? laundry

[progresso]

then check shut-off valve engine maybe remains half-closed, or delay variable geometry then you create turbulence back into the inlet, and then makes a false measurement of air mass, however, you can always try with a diagnosis on the road see parameter air mass at the time of the cut off when valid the error and the recovery if the release raises the parameter

as I said earlier, always check the flange interposed in the egr often miss because of the condensation

[angelolsp]

I don't understand xke check the flange then those who do not put...

[frantik3]

That error 99% of cases, successes, and always due to the egr as I said earlier!!!!
Control it costs you nothing to give us a look!!!!!

[rebirthafterrevenge]

sheet ? ok.. guys, but the mass of the air in the cut-off values must have? thanks

[FidodidoTuning]

Already a success.
You have to replace it,the problem is in the part elttrica

[michele30]

happened to me passes the gas in the discharge part and the electrical , I don't change it I did a good cleaning and I put two plates, one on bottom and one on top, the machine already and now all ok

[cicciocar]

Hello,I would like have already been told to change the egr group.
Then you have not specified the year, in the motor type.

[voglioimparare]

egr valve to me, the fact that it smokes black but in the crowds if the egr and plugged and very strange....the 147 more, the egr blocked,sleeves cut or mass air flow sensor that is not working has nothing...uhm...