Marelli 1.3 mjtd

[Gia]

Excuse me if I open another post similar I hook up to this.

Do you think the maps pedal need a pair or IQ?

[Gia]

I would like to start making examples. Load the image cos? everyone can see it.

I usually start from the torque limiter ( or limiters in this case) and then do the rest as I did the rev limiter.
What do you think? ? done in a correct manner?
Increase max of almost 20%



Uploaded with ImageShack.us

[cinqueturbo]

I think you left too soon, under a thousand you don't need anything,
and this is still a limiter that then you could modare also spins more? high..

[Gia]

I think you left too soon, under a thousand you don't need anything,
and this is still a limiter that then you could modare also spins more? high..

Perhaps c'? some of the misunderstanding.

Immediately after the breakpoint, we have the value of torque at 4500rpm, going back up to where I left the curve golds that are the values of torque at 900rpm and 300rpm. The mod starts at 1200rpm with a 5% pi? to get a nearly 20% increase up to the end

[cinqueturbo]

Perhaps c'? some of the misunderstanding.

Immediately after the breakpoint, we have the value of torque at 4500rpm, going back up to where I left the curve golds that are the values of torque at 900rpm and 300rpm. The mod starts at 1200rpm with a 5% pi? to get a nearly 20% increase up to the end

MMM... I've already a thing, but why? I had opened a double-Screen Titanium..
open? your file ori s? I find him to realize that...

[cinqueturbo]

Perhaps c'? some of the misunderstanding.

Immediately after the breakpoint, we have the value of torque at 4500rpm, going back up to where I left the curve golds that are the values of torque at 900rpm and 300rpm. The mod starts at 1200rpm with a 5% pi? to get a nearly 20% increase up to the end

but I see that the modato even before 1200giri?

[Danny]

I like this guide guys, I'm testing it on my swift nevertheless+...
I can not for? to get it up at high revs...down from 2000 to 4000 is quite good, with a fumosit? acceptable (no ? definitely a good map, are a beginner), and on the top? walls.
About the maps pedal, the ecm calls, however, torque limiters? Makes them interpret correctly?

[cinqueturbo]

I like this guide guys, I'm testing it on my swift nevertheless+...
I can not for? to get it up at high revs...down from 2000 to 4000 is quite good, with a fumosit? acceptable (no ? definitely a good map, are a beginner), and on the top? walls.
About the maps pedal, the ecm calls, however, torque limiters? Makes them interpret correctly?

But you see that and a 1,3 Diesel not a petrol..
however, on a panda 1.3 or up to 4500giri pulls very well then walls too her..
On the Turbo Diesel you have to take advantage of the couple, not the engine rpm...
maybe mail the File to someone good, I can? definitely help if it is a problem of the map..

[Danny]

Some Five, I know For? walls, 4000, 4500..With the module that ran only the prex pulled of pi?... But those that sport has referred to as cash advances, why? are very different between 75 and 90?
The maps lambda, what are they?

[cinqueturbo]

Some Five, I know For? walls, 4000, 4500..With the module that ran only the prex pulled of pi?... But those that sport has referred to as cash advances, why? are very different between 75 and 90?
The maps lambda, what are they?

We are dirtying a fantastic post..
you should open your own discussion, but anyway..
if you do not feel you post your file, put at least the number HW & SW so let's see what you talking about..