control unit identification

[davide2000]

you msport very clear.I'm adopernado the galletto 2.but to be able to bring his file to the original state it takes a suitable program ?because I, with the program of the galletto I can only take the data read and reprogram it.but I can not see anything, and what? inside.

so even if I take the file to the bank data ori can't get it work why? I have to adapt to her right?

[blackwolf76]

I'd say download the file with the cock by the ecu of the car and then from there it goes back to what you need.

Identifies the driver right on the cock, then do the ecu id and if you recognize you can do is read the file and save it on your pc, then say so on the forum.

[zaga1]

you msport very clear.I'm adopernado the galletto 2.but to be able to bring his file to the original state it takes a suitable program ?because I, with the program of the galletto I can only take the data read and reprogram it.but I can not see anything, and what? inside.

so even if I take the file to the bank data ori can't get it work why? I have to adapt to her right?

Or just that you can read the map file and complete the open with ecm titanium to see the exact code

[legendaryslave]

Email the file that you read you have to rebuild your file why? the bmw for the same hw and sw can have cks different around here

[zaga1]

Email the file that you read you have to rebuild your file why? the bmw for the same hw and sw can have cks different around here

You ma ? also true that the checsum once you have edited the file to change in any car not just bmw pebso that it is normal that I know of

[legendaryslave]

I have not expressed correctly, if you upload a file ori taken from another control unit also having the same hw and soft but a cks a different processor, not the quadrera the thing, and then not you'll find? l integrity? of the file and there will not be? consent to start-up, and then if you get a file ori rebuild the areas that were changed in your file ,I hope I have been of help

[zaga1]

I have not expressed correctly, if you upload a file ori taken from another control unit also having the same hw and soft but a cks a different processor, not the quadrera the thing, and then not you'll find? l integrity? of the file and there will not be? consent to start-up, and then if you get a file ori rebuild the areas that were changed in your file ,I hope I have been of help

Then you say you are recommending as I understand to take the gold one downloaded open it and overwrite the values values in the mod file the original of the car's origin cos? by not having trouble with the checksum, and without the need of corrergelo or am I wrong? Anyway if you ? cos? could do it and work it works the same with this method ;-)

[davide2000]

to open the file with what program?

[zaga1]

to open the file with what program?

If you open the ori downloaded with ecm titanium, and immediately after you upload your mod files, you can transfer the settings and the settings from the ori that your without problems

[davide2000]

but the program ecm titanium ? easy to find?