control unit identification

[davide2000]

hello to all,I should bring a ecu edc16 bmw 150hp to the original one, and in the pi? put in the correct value for the air mass meter.
I wanted to understand how do I know what? the map ori correct.I in the control unit the individual num base 7789572 n programmed 7790796
in the section ori bmw there are a lot of maps, but for the 150hp there are many numbers that I don't know what they are.

[zaga1]

The items that the laws of the two identifiers are the code of the software and the hardware of the ecu, or the ecu, you need to read the last three digits of both hardware and software revenues and the ori of the unit that you are interested in hello let me know how ? way ;-)

[davide2000]

when doing the reading with the galletto 2 mi from central data ecu 0281010565 1037351788 edc16c31

[zaga1]

when doing the reading with the galletto 2 mi from central data ecu 0281010565 1037351788 edc16c31

And then the file that you are looking for ? 565-788 this ? the code, or, on the contrary 788-565 let me know if you can find him I if c'? I had you I willingly anyway, we hope that you find it

[davide2000]

the file I found but I have to erase the writing.luckily I left the original file in the database and I'm leaving everything as it was.
many thanks for your collaboration.a beginner like me and a great help.

[zaga1]

the file I found but I have to erase the writing.luckily I left the original file in the database and I'm leaving everything as it was.
many thanks for your collaboration.a beginner like me and a great help.

I'm sorry, but if you put the file ori must funzuonare to strength except that the file that you downloaded ? damaged or understanding to the maximum you have to try again by selecting the correct drivers, and see what goes, and then the voice erase writing means writing cancelled anyway try and let me know if you want to repeat in the forum we are to help one another, and I repeat today, that you have need of me, and tomorrow ki knows if I avr? need you anyway for nothing ;-)

[davide2000]

or tried 2 times and the same result.unfortunately, from the site I still can't download I miss the number of messages.
how can I do?

[zaga1]

or tried 2 times and the same result.unfortunately, from the site I still can't download I miss the number of messages.
how can I do?

Listen to do one thing, wait until you can download your messages and after that risxarica the file, it seems to me impossible that it works

[msport (exil77grande)]

attention that bmw is not like the other houses that take a file with the same numbers on both hw and sw, and the write I would say that before giving information you should know about the thing otherwise it is better not to write crap to increment the counter of messages and to do damage to anyone who reads and beginner,also depending on the programmer used, you may change the size of the file or the data within the file, although the same size,however, if as I believe I have understood you have to put the mapping of a bmw to its original state, you need to read the file,procurarne one with the same requirements ,to compare it in the area maps, and bring it back to the original values, then in a few words rebuild your file read and rewrite the same,I hope I was clear.

[zaga1]

attention that bmw is not like the other houses that take a file with the same numbers on both hw and sw, and the write I would say that before giving information you should know about the thing otherwise it is better not to write crap to increment the counter of messages and to do damage to anyone who reads and beginner,also depending on the programmer used, you may change the size of the file or the data within the file, although the same size,however, if as I believe I have understood you have to put the mapping of a bmw to its original state, you need to read the file,procurarne one with the same requirements ,to compare it in the area maps, and bring it back to the original values, then in a few words rebuild your file read and rewrite the same,I hope I was clear.

Sorry msport but until today what I recommended that I take the hw and sw to know the file ori just me ? always work and then believe me that is not the fact for the counter na bens? for a council, then think of what you want