Just copy the values of the third bend and paste it on the first 2.
The map of cold start (the second), can you? also keep the original, otherwise as soon as you put? bike is avr? always sbuffata black
Just copy the values of the third bend and paste it on the first 2.
The map of cold start (the second), can you? also keep the original, otherwise as soon as you put? bike is avr? always sbuffata black
Exact, I have now done so? and short is the feeling of the car.
Also the EGR was not closed correctly, I know, carsoft has touched the curves that I really do not know what's the use of.....
The control of these ecu 2, and in some cases, depending on the hw version 4 or 6!
And to be lowered all...
The bit that touches Carsoftware has nothing to do..
So essentially with the change of carsoft the EGR remains com'? from the original? Damage does not?
Honestly I have never tried it why? I don't trust you, but I think of you..
it remains functional
Here's where to change carsoft for the EGR. Practically paved with those two panettoni (doves pi? what else).
The addresses are 0D6072-0D60A6 and 0D60D8-0D610C
In substance, that change has done, cos? for curiosity??
Uploaded with ImageShack.us
That he did not know, but I think it is confused with the edc16 c8 (for shape) and c39 ( for the number of curves) that are similar enough to the egr.
Well the pu? may be as you say you.Originally Written by dvdtuning
Not s? what are those 2 curves, surely? they have nothing to do with the egr since it remains open
Write permission
Quote
