you have a problem on the contact spiral of the steering wheel if the fault is in said open circuit ? normal that you do not erase control connector of the spiral is the first to see the continuity? between the plug and the contacts of the airbag steering wheel....
maybe replacing the power steering or tamper with the devialuci for the low beam ? messed up something on the cables system drivers.
the divert light ? been tampered with but ? created a bypass that tension you have lights only when needed. but for that, I have to check his system. in fact if anyone has the wiring diagram that would be awesome
with regard to the airbag controller? the better the plug, but re-assembling the old elettroguida, before you return it, the problem disappeared suspect it's a problem of codes, of course, still are a layman on the subject
test continuity between steering column and airbag driver, you have a problem on the first and second stage can be proved that spiral cable
while the others are still talking about us, we have already solved the problem
GARAGE0864 ԼЄƓЄƝƊƛƦƳƧԼƛVЄ
with the faults that you have not posted ? a problem of codes but I know that you have broken the spiral contact under the steering wheel..... this when you disassemble the wheels should be straight and the steering wheel in the center, the rule that applies to everybody, not only for renault if you have not respected you have forced the contact to the right or to the left and inside you ? walked only proof that you can do to check the continuity? between the plug and attack airbag if the removal did not have problems of spi drivers must have been something in the assembly of sbaglliato...
Write permission
Quote