request info for scodifica ecu DELCO Opel

[lalo]

Hello guys !

I have undertaken recently this branch and of course I need advice....can anyone tell me how scodifica (with what software) to a control unit Delco DZJN mounted on the Opel Meriva 1600cc ??
You do it by reading the file via the OBD ???


thanks in advance for your collaboration

[jolidj]

no you can scodificare, you have to find another ( if you and broken your) get the pincode and schedule another ecu.

[lalo]

Ok, my problems, and I had the thought to precisely replace it; but how do I find the pincode ???
thanks

[jolidj]

the pincode ( carpass) you can buy the opel ,30e, or if you have carprog you do get the code,or read the processor inside the immo box and revenues the pincode. the + fast and buy the code for opel.

[legendaryslave]

Quoto colleagues you can get the pincode from the reading of any ecu eye only warning before installing the new ecu must be made virgin with opcom or tech2 on the machine donor, with his pin code otherwise does not encode

[lalo]

Ok; thank you all for the valuable advice...... you are fantastic !!

[giary74]

I apologize if I'm stepping stone to the discussion, but I also have a problem with an ECU DELCO a Tigra 1.4 1995.
The situation ? a little confused since? the owner has lost his only key. The mechanic has ordered the Opel a new key for that ? been provided with a new pin code, but the old unit is not transposing.
Reading the previous post, I realized that you must riverginare with opcom or tech2, but I do not understand what it means to "on the donor machine"...
Could someone enlighten me? Thanks

[legendaryslave]

If the key ? was taken up with the chassis number and the pin code is found to be correct ecancelli the old key and insert the new thing feasible even with a good diagnosis, multi-brand, otherwise you have to start out by reading the box code or the framework tools and carve the pin code to access the special functions Dell immobilaiser , the engine control unit must be made virgin, in case you go to burglary and get a used one you have to riverginarls with opcom or tech2 before disassemble it from the vehicle tamer otherwise you can not with figurarla on the vehicle receiving

[giary74]

Thanks to Legendary, I think I understand...
It seems that the unit in question, now removed from the car, but until some time ago, working perfectly, not the original one since? gi? replaced for problems in the code.
Question: since? the procedure of vergin ecu of the control unit involves the use of the car, I could replace the ECU on the car, and riverginarla with OPCOM or TECH2. Done to us?, the central ? ready to accept the new code.
It is feasible the thing, or ? pi? simple try to see in demolition if c'? a control unit with key?
Thanks for your opinion.

[legendaryslave]

the problem ? always the pin code if you can access the special functions of the engine ecu ? made can you riverginarla also on another machine with code that is not aligned