Azzzzz I want to learn how to use winols but these damos I did not understand, serve, or not?
Azzzzz I want to learn how to use winols but these damos I did not understand, serve, or not?
this ? a question that goes outside of the use of winols, I try to respond, the damos serve if one has the intention to study in depth the meaning of the various maps and not rely on what they tell about (bad) drivers, or files, setting...Originally Written by Dragonfly
Guys I see that you abandoned the discussion is very important, I'm not an ace I do that a little on winols calculation cks load maps and find some address with the Damos that we all have, and then mod in tita, I would like to help you as I am interested, too, to change and discover new? this magnificent software that fascinates by its potential?!!
You do not really understand something until you can explain it to your grandmother (Einstein)
shares in full motorsport this discussion I find it I also very important to use I also winols and I would be interested in any news?........
guys, I use it as a sw main, then I do not say that I know like the back of my pockets, but a little' me there I know to move, ask if they can answer it gladly!
Hello't you do a little guide to make a mod for as many as m? who doesn't understand a bat?.
Greetings.
a guide you can? do as we post something,anyway the beginning I then sandro and available + other colleagues,to begin anto..you have to tweak even on the soft.....
The first procedure to upload a file ori + the damos open winols,from the desktop, take the file to bring it directly on the screen of the program so that it loads automatically.
then click on the project go to the ex & import then finally import damos & asap2.. opens a screen to go forward, you see a drop-down menu, where do you get the damos in the folder you have stored on your pc that you need to associate your file ori,the loads go ahead, click on "ALL", then the END.........
on the left you will find the addresses and names of the maps,on the ds you will find the maps in 2d that you want to modify by selecting the map with the tip of the mouse right-click "change-related" % opens a window you need to enter the check on "current date" check "percentage" in the empty box, enter the value as 10 the mod in %....then ok......the end of the mod!!
to save a modified file on the desktop, go to project/ex & import........ then "export to file" "import file"...... end of!!
*sandro for the damos when you charge you must set the off set?? or auto be fine??
guys I hope I explained it well....
You do not really understand something until you can explain it to your grandmother (Einstein)
if the file *.hex on which you want to import ? what specific ? combined with the damos not c'? no need to set the offset, as the addresses will be the same. If instead, you would like to apply it to a file like the divenderebbe essential, but you have to consider that usually the 2 original files do not have an offset, but I have many more?, so in the end if you want to work with the damos agrees to keep open a window with what is loaded on his *.hex and compare the maps with the files that we are interested.
I would add that for change you can? also, once you have selected the area to be moddare press "enter" or "=," and enter the value that you want to have on the selected area. Or,you can? make a change to the points by pressing "+", and the data increases to "1", or "ctrl +" increasing "100" (there should also be a way to change these values, but still do not ?', I found)
Thanks to the both of you are very kind, and only at this moment in time are taken from the other problems and I don't have much time to fiddle around, however, I thank you and will certainly disturbero still.a guide you can? do as we post something,anyway the beginning I then sandro and available + other colleagues,to begin anto..you have to tweak even on the soft.....
The first procedure to upload a file ori + the damos open winols,from the desktop, take the file to bring it directly on the screen of the program so that it loads automatically.
then click on the project go to the ex & import then finally import damos & asap2.. opens a screen to go forward, you see a drop-down menu, where do you get the damos in the folder you have stored on your pc that you need to associate your file ori,the loads go ahead, click on "ALL", then the END.........
on the left you will find the addresses and names of the maps,on the ds you will find the maps in 2d that you want to modify by selecting the map with the tip of the mouse right-click "change-related" % opens a window you need to enter the check on "current date" check "percentage" in the empty box, enter the value as 10 the mod in %....then ok......the end of the mod!!
to save a modified file on the desktop, go to project/ex & import........ then "export to file" "import file"...... end of!!
*sandro for the damos when you charge you must set the off set?? or auto be fine??
guys I hope I explained it well....
Hello.
Thanks sandro was off,I would like to add to delete the mod with the key "F11" returns ori......with "delete" he removes the highlighted screen with the mouse!!
You do not really understand something until you can explain it to your grandmother (Einstein)
Write permission
Quote