Page 4 of 5 PrimaBefore ... 2345 LastUltima
Results 31 to 40 of 45
  1. #31
    THE AVERAGE USER
    Date Of Registration
    Jan 2013
    Messages
    238
    Here is the map by following your advice. Let me know what you think
    File Allegati File Attachments

  2. #32
    THE AVERAGE USER
    Date Of Registration
    Aug 2012
    Messages
    123
    Hello Carbo 92, the torque limiter may also go, maybe you should touch up the limiter of the turbo, at least 200 points than the original.
    Then you could try it, but wait for the opinion of someone more expert to be sure.

  3. #33
    THE AVERAGE USER
    Date Of Registration
    Jan 2013
    Messages
    238
    Citazione Originally Written by lupak Visualizza Messaggio
    Hello Carbo 92, the torque limiter may also go, maybe you should touch up the limiter of the turbo, at least 200 points than the original.
    Then you could try it, but wait for the opinion of someone more expert to be sure.
    They are a little many as 200 points? I would like a map soft just to make less effort to the engine and reduce fuel consumption

  4. #34
    THE AVERAGE USER
    Date Of Registration
    Aug 2012
    Messages
    123
    Hello carbo92, at that point, you're with your map ?
    L' have you tried ?

  5. #35
    THE AVERAGE USER
    Date Of Registration
    Jan 2013
    Messages
    238
    Citazione Originally Written by lupak Visualizza Messaggio
    Hello carbo92, at that point, you're with your map ?
    L' have you tried ?
    Really on this map are stopped and waiting for some advice.

  6. #36
    THE AVERAGE USER
    Date Of Registration
    Aug 2012
    Messages
    123
    I told you to increase iol restrictor of the turbo, why? the pressure goal ? the higher the rev limit the same .
    We wait for someone more expert gives us his opinion.

  7. #37
    THE AVERAGE USER
    Date Of Registration
    Jan 2013
    Messages
    238
    Citazione Originally Written by lupak Visualizza Messaggio
    I told you to increase iol restrictor of the turbo, why? the pressure goal ? the higher the rev limit the same .
    We wait for someone more expert gives us his opinion.
    Sure what I did but I was expecting someone for some advice on other increases or address to find.

  8. #38
    THE AVERAGE USER
    Date Of Registration
    Jan 2013
    Messages
    238
    Guys anyone who can? help me to find some other useful address?

  9. #39
    THE AVERAGE USER
    Date Of Registration
    Jun 2012
    Messages
    285
    074494 from this address, leave the torque limiters single gear, adeguali otherwise most of 65mg not go

  10. #40
    THE AVERAGE USER
    Date Of Registration
    Jan 2013
    Messages
    238
    Citazione Originally Written by pinotec Visualizza Messaggio
    074494 from this address, leave the torque limiters single gear, adeguali otherwise most of 65mg not go
    Sorry but with what you have seen? In winols does not c'? that address and the only limiter that I have found ? 74c4a

Page 4 of 5 PrimaBefore ... 2345 LastUltima

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •