lance ypslon 1.3 mj

[vincenzot]

I have a spear mj, 70 hp, I would like to replace the file with the ori mpps but the owner of the machine has a file from 64kh[HR][/HRb can I upload it so.thanks

[danny677]

I would say no, made a backup of the one currently in the ecu, and then from the reading of the hw version and sw and put them on ******you should find a gold entire .
What ? some with mpps, the file must be 448k, not 64k .

[danny677]

allow me to warn you for the post no. 26 http://www.professionalchiptuning.ne...ll=1#post47076
that explains how to proceed

[msport (exil77grande)]

the file is 64 kb, and has been read with the old cock so if you want to rewrite that file you have to do it with the cock,but if you have to write with mpps mail the file to 64kb that we provide the corresponding 448kb to write with mpps.

[vincenzot]

the file is 64 kb, and has been read with the old cock so if you want to rewrite that file you have to do it with the cock,but if you have to write with mpps mail the file to 64kb that we provide the corresponding 448kb to write with mpps.

I also have a kwp plus I could with what

[msport (exil77grande)]

the kwp I don't know what size, reads the old 1.3 mjet you should do a reading test to be sure.

[alex68]

mail sw and hdw so you'll find the ori, and I write with mpps safely

[vincenzot]

thanks to all, how is in the workshop will place the file

[angelolsp]

About 70 to 75 mpps okay ? The file of the 75 drve be a mega true?

[msport (exil77grande)]

you mpps goes well 70cv reads and writes to the size 448kb while for the 75-90hp the file, you can only write,original file size 2m that you have to cut to 1m to write with mpps.