help map 159 1.9 JTDm 150 hp

[SandroMarciano]

sandro...I am pro deleting, swirl...xk?...you know very well that with the time and the sludge that are formed inevitably in the intake manifold, these tend to crash..there were cases in which they are removed and eaten by the engine...with results that well images.
At this point, I prefer to delete them, both physically and from the map...I did it on my own...and I can assure you from personal experience that I have not experienced declines in sensitive while driving..

gi? keep closed the egr from new, the sludge disappear... tried it on the 159. the cali do not feel ****llo of absolute performance (which may impercettibilemente also increase), but in terms of fuel consumption.

[mariodarkblue]

gi? keep closed the egr from new, the sludge disappear... tried it on the 159. the cali do not feel ****llo of absolute performance (which may impercettibilemente also increase), but in terms of fuel consumption.

You say?...as for consumption...I have not done any tests or feedback...unfortunately, you know better than me that map you lose the warranty...and the new cars have 2 year warranty...assumes, not less than 50.000 km and 50,000 km ? done already? the dirt in the drains...of course everyone has their own way of seeing
if I can avoid destroying the engine...I do...even if I have to pay a minimum consumption of fuel in the most...

[hyrosat]

Guys I also have the problem of the swirl on my 159 I also posted the photo what do you advise me to remove them I have to take a precollettore and replace the old one, I see how they are put

precollettore suction 159_1900 jtdm 16V_150CV.jpg

then I open another post for an opinion on my first changes to my map and a 159 1900 16V 150 CV you give me an opinion?

Thanks

[SandroMarciano]

Ops... the warranty... I can't remember ever...

[dart.1989]

guys do not ? that would be cos? kind enough to give me some info cos? I delete also the valve swirl while there are

[mariodarkblue]

Dart has more ke, very good...in fact, I opened a post dedicated to edc16c..so as not to lose information...and I've also written as you block the swirl always open...maybe if you look at that post....without hope that one t provide the food ready....

[hyrosat]

hello dart.1989 at which point you are with the map? I also started to do something ? in this page http://www.professionalchiptuning.ne...1900-16v-150CV

[dart.1989]

hello dart.1989 at which point you are with the map? I also started to do something ? in this page http://www.professionalchiptuning.ne...1900-16v-150CV

hello hyrosat unfortunately I had to stop because? I had a problem with a tripoide of the drive shaft and then I had to leave for work so I have not been able to finish even the tube that goes to replace the fap as soon as I finish the horsemanship and start again you at that point 6?

[hyrosat]

Hello dart say that I have made ready a step1 that seems to goes as well as the beginning of the sandro gave me other tips now as soon as I have time, I make the changes and place the second step and let's see what comes out, but I have the turbo that's not going so well whistles a little bit, damn, but you mica ? success ripping a little bit in the car occasionally at low rpm? type a sob.

[dart.1989]

Hello dart say that I have made ready a step1 that seems to goes as well as the beginning of the sandro gave me other tips now as soon as I have time, I make the changes and place the second step and let's see what comes out, but I have the turbo that's not going so well whistles a little bit, damn, but you mica ? success ripping a little bit in the car occasionally at low rpm? type a sob.

it is sometimes cold rips a pokino but not always