Ford focus 1.6 Tdci no fap

[legendaryslave]

the bit in the file ? was touched that errors you find in diagnosis

[Alfiuccio]

error: P2454 circuit differential pressure signal low
P1622 identification of the immobilizer does not match
diagnosis of back pressure is always stable at 119.85 mbar.....unfortunately, I can see fitting...nn ec is as a parameter....(texa and tecnomotor)

[SandroMarciano]

the council ? to buy an interface, even a chicken 2 clone does its job well, and if the do profession the reward soon. After write the file no fap good.

[leandro89]

but with the file ori gave you these errors?

[legendaryslave]

according to me you have a problem in the wiring of the sensor differential pressure or in the sensor itself tries to scaccare the factory or at the limit check for any short circuit or change the sensor, then P1622 ? a whole different story,you do these tests and let them know

[legendaryslave]

but with the file ori gave you these errors?

this ? also a good question

[Alfiuccio]

I returned to the car with the light on and with this error (because fap drilled by a colleague)...they contacted me and said that he just drilled out the fap because it was clogged and had broken two turbines.....I already tried another sensor dpf but nothing to do.....contacting support alientech they told me that the error is removed automatically by removing the dpf from the ecu......and then because it always reads the back-pressure?

[msport (exil77grande)]

sorry guys but maybe I have problems with vista,I, in the two files posted by the user alfiuccio I see:
1 file completely ori
1 file with only an incomplete mapping and reasoning that I do not absolutely
now my question is:
but where the hell is the luca stanca?
then I respond to the user alfiuccio,if you say you have read with kess slave and sent to the alientech which is your master as ever, the two files are not encrypted?
the file read with the slave them can make it clear only your master, so it is not a separate master can do it, but only those who are connected to you,then I don't understand why with mpps, you can't write this ecu that is perfectly compatible with mpps even if it is a bit risky for the loss of the coding injectors,they also have told you that the file is read by you and' mod,but what is this file if you have only one file golds and one mod from them?
then you have given the council a very serious,if you read the file of the ecu,send him to them for the luca stanca,then go in conc ford to do an update, and finally write the luca stanca made from them 99% of the blocks, the control unit,however, please contact us at info*professionalchiptuning.net that is, we solve the problem in the shortest possible time.

[leandro89]

msport does not see evil, if you notice the file ori ? equal to the one that I sent you and I to the luca stanca, only that my result as I said before ? great that is, without light and without recovery

[Alfiuccio]

Hello msport'm in the clear on some points.....I have mpps v3 that the law perfectly these ecu....the problem is the writing (error request out of range) even v 5 (mpps), performs the write....initially, I read with mpps...I made no fap with time, and made a mod (let's say full)....nn potento do the writing I had to read file ori with the slave and at the same time I sent my mod + nofap in such a way that I could do a "copy and paste" of my mod format slave......I respond that time nn works on these units, and that would have changed my mod file (I am referring to the mapping).....send me the mod file (made by them) in the form of a slave, and after the writing, I re-read the file with mpps.....this is why the two files that I posted nn are encrypted....My mod files was much more comprehensive than what you have given them, and then nn understand their luca stanca, which is totally different compared to what I have done with time....