Page 1 of 2 12 LastUltima
Results 1 to 10 of 15

Discussion: FIAT Doblò 1600 16v

  1. #1
    THE AVERAGE USER
    Date Of Registration
    Feb 2013
    Messages
    120

    FIAT Dobl? 1600 16v

    Good morning.
    I have found in a Fiat Dobl? 1600 16v with lpg system, the following error codes:

    u1602 error CAN line
    p0571 cruise control
    p0460 sensor ****llo fuel
    u1600 electronic key
    p1687 motorised butterfly (stop learning)
    p0171 system lean critical

    What do you think ? the problem? I think there is to change the ecu.
    The car has an ecu MArelli IAW 5nf hw103. If I wanted to try to mount a Marelli 5nf hw102 would be compatible?

  2. #2
    THE AVERAGE USER
    Date Of Registration
    Feb 2013
    Messages
    120
    As to the accuracy of the control unit mounted on the car Marelli IAW 5nf T2, the other ? a Marelli IAW 5nf T1 that was mounted on a Stilo 1600 16V.

  3. #3
    THE AVERAGE USER
    Date Of Registration
    Mar 2013
    Messages
    143
    plant and stock or mounted after

  4. #4
    THE AVERAGE USER
    Date Of Registration
    Feb 2013
    Messages
    120
    mounted after

  5. #5
    THE AVERAGE USER L'avatar di fuorigiri
    Date Of Registration
    Nov 2012
    Messages
    186
    you can try to put the file ori on what changed then the t1, it becomes t2 if you need I can do
    If you are never wrong means you're not solving a really difficult problem. This is a serious mistake

  6. #6
    THE AVERAGE USER
    Date Of Registration
    Feb 2013
    Messages
    120
    Citazione Originally Written by redline Visualizza Messaggio
    you can try to put the file ori on what changed then the t1, it becomes t2 if you need I can do
    I'm glad you can do it but I don't think you're the only one on this forum to know how to clone a unit...I wanted a hand to understand if the two hw are compatible (I don't want to take a control unit which then I can use), and if the error codes are derived from the unit is not working or some other fault.

  7. #7
    THE AVERAGE USER L'avatar di fuorigiri
    Date Of Registration
    Nov 2012
    Messages
    186
    be to check the error codes from what arise depends only and exclusively with the professionalism that each of us has
    If you are never wrong means you're not solving a really difficult problem. This is a serious mistake

  8. #8
    Banned
    Date Of Registration
    Mar 2013
    The resort
    Verbania
    Messages
    286
    Citazione Originally Written by Tinturia Visualizza Messaggio
    Good morning.
    I have found in a Fiat Dobl? 1600 16v with lpg system, the following error codes:

    u1602 error CAN line
    p0571 cruise control
    p0460 sensor ****llo fuel
    u1600 electronic key
    p1687 motorised butterfly (stop learning)
    p0171 system lean critical

    What do you think ? the problem? I think there is to change the ecu.
    The car has an ecu MArelli IAW 5nf hw103. If I wanted to try to mount a Marelli 5nf hw102 would be compatible?
    p0171 ? induced by the ill-fuel mixture gas (with little knowledge of how to adjust the gas or little desire, generally the sum of the two)
    p0460 I assume that this is triggered by wrong sensor ****llo is installed on the ****llo fuel benza which serves to avoid that the needle drops when you go to the gas
    p0571 may be induced by an ill-adjustment of the gas

    the other may simply be a failure to verify.

    the transmission ecu does not solve your problems unless you are real, and I don't think they are.

  9. #9
    THE AVERAGE USER
    Date Of Registration
    Feb 2013
    Messages
    120
    You are rightly free to believe us? that you want. I have only transcribed the errors seen in the diagnosis. This machine is sometimes not part, if the part turns off after a little or not salt is good laps. I knew that in these engines, the throttle body sometimes does not work well, and it happens that the units will fail (information give me a plumber, gas plants). I put the post why? maybe to someone ? gi? happened something similar and could give me some right direction.

  10. #10
    THE ACTIVE USER (FO) (OF) L'avatar di legendaryslave
    Date Of Registration
    Dec 2012
    The resort
    RAIANO(AQ)
    Et
    44
    Messages
    1,985
    Citazione Originally Written by carmageddon Visualizza Messaggio
    p0171 ? induced by the ill-fuel mixture gas (with little knowledge of how to adjust the gas or little desire, generally the sum of the two)
    p0460 I assume that this is triggered by wrong sensor ****llo is installed on the ****llo fuel benza which serves to avoid that the needle drops when you go to the gas
    p0571 may be induced by an ill-adjustment of the gas

    the other may simply be a failure to verify.

    the transmission ecu does not solve your problems unless you are real, and I don't think they are.
    u1600 electronic key there is' always in the fiat, u1602 error CAN line ? the relative de l first , p0171 system lean critical due to gas certainly, I don't think is to replace the ecu but the failures are cancellabbili you still have the machine
    while the others are still talking about us, we have already solved the problem
    GARAGE0864 ԼЄƓЄƝƊƛƦƳƧԼƛVЄ

Page 1 of 2 12 LastUltima

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •