Read - write Musa 1.3 90hp 6f3 with fgtech v53

[emilground]

Hi guys, today I read with fgtech v53 a musa 1.3 90hp and the generated file ? 2.5 mb that the ecm does not recognize (? gi? mapped the drive but it's not okay, it only consumes as much).
Here on the forum, I found the file to 2mb, which is regularly recognized by the ecm. The problem ? that I don't know if I can write to the file found here 2mb with the fgtech seen me has returned a 2.5..
evidently also read the micro and assembled everything in a single file. In reading I have no chance? to set which type do, if it is complete or not.
Then I was curious about also compare the file is 2.5 mb ( so that sucks to the map ? was made why? the car range with a lot of moderation seems to face 15 km/l !! with the 2-mb (or 1 mb) . Possibly c'? way to cut it in the correct way ?
This damn fgtech always makes me strange file.. type on the 500 abarth where legendaryslave gave me the info to cut it in the correct way.
now I'm trying to read it with MPPS v5 that recognizes the ecu and is proceeding with the reading, cos? maybe will get? the correct file to be cut and written to 1 mb

[carmageddon]

-on the ecu, K, can be cut to size to 1mb, and write with mpps, this operation ? valid only for the ecu on the CAN
-if you read with fg2, you have to write 2.5 mb with fg2
-you can not write 2 mb with fg2 why? in K need the mpc 512 kb as the kess...then 2.5 mb as you read

[special]

hello I would make a nice backup in the bdm to avoid problems..

[emilground]

I just finished reading with the MPPS V5 and file ? 448kb, then it's not okay because? ? 90hp and not 70.

Practically I have to write to the file, 2.5 mb..? since the car already? remapped I would need the original file. up to now only 2mb I found.
These are the data:
MJD6F3HW03T 3056M350 51784559

Someone has a file ori 2.5 mb bed with fgtech cos? to compare it with the one read from the drive?

Possibly next week user? the BDM

[Backgroop]

hello e-mail the file, 2.5 mb let's see if we can help..

[emilground]

Here is the file that is read by 2.5 mb

[leandro89]

but this ? the virtual read, how long did it take you to read?

[emilground]

No No ? virtual reading. It took about 80 minutes

[cicciogsr]

read and write to the same muse for? with hw and sw is different, with rooster v2 I confirm that I read 80 min and write 40 min..

[carmageddon]

but this ? the virtual read, how long did it take you to read?

on ecu mjet+ K not c ? the virtual read-only in the CAN